wheel/build/log/idf_py_stdout_output_8900

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4037ba4e
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3810,len:0x168c
load:0x403c9700,len:0xbe0
load:0x403cc700,len:0x2cd0
entry 0x403c9908
I (24) boot: ESP-IDF v5.0.4-dirty 2nd stage bootloader
I (25) boot: compile time 09:48:03
I (25) boot: Multicore bootloader
I (27) boot: chip revision: v0.1
I (31) boot.esp32s3: Boot SPI Speed : 80MHz
I (36) boot.esp32s3: SPI Mode       : DIO
I (40) boot.esp32s3: SPI Flash Size : 2MB
I (45) boot: Enabling RNG early entropy source...
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (61) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (69) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (76) boot:  2 factory          factory app      00 00 00010000 00100000
I (84) boot: End of partition table
I (88) esp_image: segment 0: paddr=00010020 vaddr=3c080020 size=21590h (136592) map
I (121) esp_image: segment 1: paddr=000315b8 vaddr=3fc96a00 size=03e00h ( 15872) load
I (125) esp_image: segment 2: paddr=000353c0 vaddr=40374000 size=0ac58h ( 44120) load
I (136) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=7ae6ch (503404) map
I (227) esp_image: segment 4: paddr=000bae94 vaddr=4037ec58 size=07cbch ( 31932) load
I (242) boot: Loaded app from partition at offset 0x10000
I (243) boot: Disabling RNG early entropy source...
I (243) cpu_start: Multicore app
I (247) cpu_start: Pro cpu up.
I (250) cpu_start: Starting app cpu, entry point is 0x40375370
I (0) cpu_start: App cpu up.
I (266) cpu_start: Pro cpu start user code
I (266) cpu_start: cpu freq: 160000000 Hz
I (267) cpu_start: Application information:
I (267) cpu_start: Project name:     wifi_station
I (267) cpu_start: App version:      v5.0.4-dirty
I (267) cpu_start: Compile time:     Jan 20 2024 09:40:37
I (268) cpu_start: ELF file SHA256:  4397a0fa38d159d6...
I (268) cpu_start: ESP-IDF:          v5.0.4-dirty
I (268) cpu_start: Min chip rev:     v0.0
I (268) cpu_start: Max chip rev:     v0.99 
I (268) cpu_start: Chip rev:         v0.1
I (269) heap_init: Initializing. RAM available for dynamic allocation:
I (269) heap_init: At 3FCA42E8 len 00045428 (277 KiB): DRAM
I (269) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM
I (270) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (270) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM
I (271) spi_flash: detected chip: gd
I (272) spi_flash: flash io: dio
W (272) spi_flash: Detected size(8192k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (273) app_start: Starting scheduler on CPU0
I (273) app_start: Starting scheduler on CPU1
I (273) main_task: Started on CPU0
I (283) main_task: Calling app_main()
I (303) wifi station: ESP_WIFI_MODE_STA
I (303) pp: pp rom version: e7ae62f
I (303) net80211: net80211 rom version: e7ae62f
I (313) wifi:wifi driver task: 3fcae320, prio:23, stack:6656, core=0
I (313) system_api: Base MAC address is not set
I (313) system_api: read default base MAC address from EFUSE
I (323) wifi:wifi firmware version: e2d0ad8
I (323) wifi:wifi certification version: v7.0
I (323) wifi:config NVS flash: enabled
I (323) wifi:config nano formating: disabled
I (323) wifi:Init data frame dynamic rx buffer num: 32
I (323) wifi:Init management frame dynamic rx buffer num: 32
I (323) wifi:Init management short buffer num: 32
I (323) wifi:Init dynamic tx buffer num: 32
I (323) wifi:Init static tx FG buffer num: 2
I (323) wifi:Init static rx buffer size: 1600
I (323) wifi:Init static rx buffer num: 10
I (323) wifi:Init dynamic rx buffer num: 32
I (323) wifi_init: rx ba win: 6
I (323) wifi_init: tcpip mbox: 32
I (323) wifi_init: udp mbox: 6
I (323) wifi_init: tcp mbox: 6
I (323) wifi_init: tcp tx win: 5744
I (323) wifi_init: tcp rx win: 5744
I (323) wifi_init: tcp mss: 1440
I (323) wifi_init: WiFi IRAM OP enabled
I (323) wifi_init: WiFi RX IRAM OP enabled
I (333) phy_init: phy_version 610,2bff4c8,Jul 27 2023,20:22:14
I (363) wifi:mode : sta (f4:12:fa:57:c4:a4)
I (363) wifi:enable tsf
I (363) wifi station: wifi_init_sta finished.
I (373) wifi:new:<11,0>, old:<1,0>, ap:<255,255>, sta:<11,0>, prof:1
I (373) wifi:state: init -> auth (b0)
I (453) wifi:state: auth -> assoc (0)
I (453) wifi:state: assoc -> run (10)
I (613) wifi:connected with CMCC-xRSZ, aid = 134, channel 11, BW20, bssid = 74:6f:88:5a:5f:88
I (613) wifi:security: WPA2-PSK, phy: bgn, rssi: -48
I (623) wifi:pm start, type: 1

I (623) wifi:set rx beacon pti, rx_bcn_pti: 0, bcn_timeout: 0, mt_pti: 25000, mt_time: 10000
I (663) wifi:<ba-add>idx:0 (ifx:0, 74:6f:88:5a:5f:88), tid:0, ssn:0, winSize:64
I (663) wifi:<ba-add>idx:1 (ifx:0, 74:6f:88:5a:5f:88), tid:1, ssn:0, winSize:64
I (693) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (1133) wifi:<ba-del>idx
I (1133) wifi:<ba-add>idx:0 (ifx:0, 74:6f:88:5a:5f:88), tid:0, ssn:1, winSize:64
I (1623) esp_netif_handlers: sta ip: 192.168.1.156, mask: 255.255.255.0, gw: 192.168.1.1
I (1623) wifi station: got ip:192.168.1.156
I (1623) wifi station: connected to ap SSID:CMCC-xRSZ password:dughk9gm
I (1623) modbus tcp: ModBusTCPSlave_init()
I (1623) example: Create DC motor
I (1623) gpio: GPIO[12]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (1623) gpio: GPIO[13]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (1623) example: Init pcnt driver to decode rotary signal
I (1623) gpio: GPIO[34]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (1623) gpio: GPIO[35]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (1623) gpio: GPIO[35]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (1623) gpio: GPIO[34]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (1623) example: Create PID control block
I (1623) example: Create a timer to do PID calculation periodically
I (1623) example: Enable motor
I (1623) example: Forward motor
I (1623) example: Start motor speed loop
I (2633) example: cur_pulse_count:0
I (3633) example: cur_pulse_count:0
I (3673) modbus tcp: accept assess
I (4633) example: cur_pulse_count:0
I (4693) modbus tcp: ModBusSlave_recv()
I (4693) modbus: ModbusSlaveProcess()---------------------------
I (4693) modbus: check id...
I (4693) modbus: ok
I (4693) modbus: add: 0, length: 10
I (4693) modbus: Read Holding Registers
I (5633) example: cur_pulse_count:0
I (5733) modbus tcp: ModBusSlave_recv()
I (5733) modbus: ModbusSlaveProcess()---------------------------
I (5733) modbus: check id...
I (5733) modbus: ok
I (5733) modbus: add: 0, length: 10
I (5733) modbus: Read Holding Registers
I (6633) example: cur_pulse_count:0
I (6743) modbus tcp: ModBusSlave_recv()
I (6743) modbus: ModbusSlaveProcess()---------------------------
I (6743) modbus: check id...
I (6743) modbus: ok
I (6743) modbus: add: 0, length: 10
I (6743) modbus: Read Holding Registers
I (7633) example: cur_pulse_count:0
I (7803) modbus tcp: ModBusSlave_recv()
I (7803) modbus: ModbusSlaveProcess()---------------------------
I (7803) modbus: check id...
I (7803) modbus: ok
I (7803) modbus: add: 0, length: 10
I (7803) modbus: Read Holding Registers
I (8633) example: cur_pulse_count:0
I (8853) modbus tcp: ModBusSlave_recv()
I (8853) modbus: ModbusSlaveProcess()---------------------------
I (8853) modbus: check id...
I (8853) modbus: ok
I (8853) modbus: add: 0, length: 10
I (8853) modbus: Read Holding Registers
I (9633) example: cur_pulse_count:0
I (9823) modbus tcp: ModBusSlave_recv()
I (9823) modbus: ModbusSlaveProcess()---------------------------
I (9823) modbus: check id...
I (9823) modbus: ok
I (9823) modbus: add: 0, length: 10
I (9823) modbus: Read Holding Registers
I (10633) example: cur_pulse_count:16
I (10733) modbus tcp: ModBusSlave_recv()
I (10733) modbus: ModbusSlaveProcess()---------------------------
I (10733) modbus: check id...
I (10733) modbus: ok
I (10733) modbus: add: 0, length: 10
I (10733) modbus: Read Holding Registers
I (11633) example: cur_pulse_count:78
I (11753) modbus tcp: ModBusSlave_recv()
I (11753) modbus: ModbusSlaveProcess()---------------------------
I (11753) modbus: check id...
I (11753) modbus: ok
I (11763) modbus: add: 0, length: 10
I (11763) modbus: Read Holding Registers
I (12633) example: cur_pulse_count:197
I (12783) modbus tcp: ModBusSlave_recv()
I (12783) modbus: ModbusSlaveProcess()---------------------------
I (12783) modbus: check id...
I (12783) modbus: ok
I (12783) modbus: add: 0, length: 10
I (12783) modbus: Read Holding Registers
I (13633) example: cur_pulse_count:280
I (13803) modbus tcp: ModBusSlave_recv()
I (13803) modbus: ModbusSlaveProcess()---------------------------
I (13803) modbus: check id...
I (13803) modbus: ok
I (13803) modbus: add: 0, length: 10
I (13803) modbus: Read Holding Registers
I (14633) example: cur_pulse_count:66
I (14833) modbus tcp: ModBusSlave_recv()
I (14833) modbus: ModbusSlaveProcess()---------------------------
I (14833) modbus: check id...
I (14833) modbus: ok
I (14833) modbus: add: 0, length: 10
I (14833) modbus: Read Holding Registers
I (15633) example: cur_pulse_count:-102
I (15853) modbus tcp: ModBusSlave_recv()
I (15853) modbus: ModbusSlaveProcess()---------------------------
I (15853) modbus: check id...
I (15853) modbus: ok
I (15853) modbus: add: 0, length: 10
I (15853) modbus: Read Holding Registers
I (16633) example: cur_pulse_count:-251
I (16883) modbus tcp: ModBusSlave_recv()
I (16883) modbus: ModbusSlaveProcess()---------------------------
I (16883) modbus: check id...
I (16883) modbus: ok
I (16883) modbus: add: 0, length: 10
I (16883) modbus: Read Holding Registers
I (17633) example: cur_pulse_count:-251
I (17903) modbus tcp: ModBusSlave_recv()
I (17903) modbus: ModbusSlaveProcess()---------------------------
I (17903) modbus: check id...
I (17903) modbus: ok
I (17903) modbus: add: 0, length: 10
I (17903) modbus: Read Holding Registers
I (18633) example: cur_pulse_count:-251
I (18943) modbus tcp: ModBusSlave_recv()
I (18943) modbus: ModbusSlaveProcess()---------------------------
I (18943) modbus: check id...
I (18943) modbus: ok
I (18943) modbus: add: 0, length: 10
I (18943) modbus: Read Holding Registers
I (19633) example: cur_pulse_count:-251
I (19953) modbus tcp: ModBusSlave_recv()
I (19953) modbus: ModbusSlaveProcess()---------------------------
I (19953) modbus: check id...
I (19953) modbus: ok
I (19953) modbus: add: 0, length: 10
I (19953) modbus: Read Holding Registers
I (20633) example: cur_pulse_count:-251
I (21023) modbus tcp: ModBusSlave_recv()
I (21023) modbus: ModbusSlaveProcess()---------------------------
I (21023) modbus: check id...
I (21023) modbus: ok
I (21023) modbus: add: 0, length: 10
I (21023) modbus: Read Holding Registers
I (21633) example: cur_pulse_count:-251
I (21993) modbus tcp: ModBusSlave_recv()
I (21993) modbus: ModbusSlaveProcess()---------------------------
I (21993) modbus: check id...
I (22003) modbus: ok
I (22003) modbus: add: 0, length: 10
I (22003) modbus: Read Holding Registers
I (22633) example: cur_pulse_count:-251
I (22923) modbus tcp: ModBusSlave_recv()
I (22923) modbus: ModbusSlaveProcess()---------------------------
I (22923) modbus: check id...
I (22923) modbus: ok
I (22923) modbus: add: 0, length: 10
I (22923) modbus: Read Holding Registers
I (23633) example: cur_pulse_count:-251
I (23943) modbus tcp: ModBusSlave_recv()
I (23943) modbus: ModbusSlaveProcess()---------------------------
I (23943) modbus: check id...
I (23943) modbus: ok
I (23953) modbus: add: 0, length: 10
I (23953) modbus: Read Holding Registers
I (24633) example: cur_pulse_count:-251
I (24963) modbus tcp: ModBusSlave_recv()
I (24963) modbus: ModbusSlaveProcess()---------------------------
I (24963) modbus: check id...
I (24963) modbus: ok
I (24963) modbus: add: 0, length: 10
I (24973) modbus: Read Holding Registers
I (25633) example: cur_pulse_count:-251
I (25993) modbus tcp: ModBusSlave_recv()
I (25993) modbus: ModbusSlaveProcess()---------------------------
I (25993) modbus: check id...
I (25993) modbus: ok
I (25993) modbus: add: 0, length: 10
I (25993) modbus: Read Holding Registers
I (26633) example: cur_pulse_count:-251
I (27023) modbus tcp: ModBusSlave_recv()
I (27023) modbus: ModbusSlaveProcess()---------------------------
I (27023) modbus: check id...
I (27023) modbus: ok
I (27023) modbus: add: 0, length: 10
I (27023) modbus: Read Holding Registers
I (27633) example: cur_pulse_count:-251
I (28043) modbus tcp: ModBusSlave_recv()
I (28043) modbus: ModbusSlaveProcess()---------------------------
I (28043) modbus: check id...
I (28043) modbus: ok
I (28043) modbus: add: 0, length: 10
I (28043) modbus: Read Holding Registers
I (28633) example: cur_pulse_count:-251
I (29073) modbus tcp: ModBusSlave_recv()
I (29073) modbus: ModbusSlaveProcess()---------------------------
I (29073) modbus: check id...
I (29073) modbus: ok
I (29073) modbus: add: 0, length: 10
I (29073) modbus: Read Holding Registers
I (29633) example: cur_pulse_count:-251
I (30093) modbus tcp: ModBusSlave_recv()
I (30093) modbus: ModbusSlaveProcess()---------------------------
I (30093) modbus: check id...
I (30093) modbus: ok
I (30093) modbus: add: 0, length: 10
I (30093) modbus: Read Holding Registers
I (30633) example: cur_pulse_count:-251
I (31113) modbus tcp: ModBusSlave_recv()
I (31113) modbus: ModbusSlaveProcess()---------------------------
I (31113) modbus: check id...
I (31113) modbus: ok
I (31113) modbus: add: 0, length: 10
I (31123) modbus: Read Holding Registers
I (31633) example: cur_pulse_count:-251
I (32183) modbus tcp: ModBusSlave_recv()
I (32183) modbus: ModbusSlaveProcess()---------------------------
I (32183) modbus: check id...
I (32183) modbus: ok
I (32183) modbus: add: 0, length: 10
I (32183) modbus: Read Holding Registers
I (32633) example: cur_pulse_count:-251
I (33163) modbus tcp: ModBusSlave_recv()
I (33163) modbus: ModbusSlaveProcess()---------------------------
I (33163) modbus: check id...
I (33163) modbus: ok
I (33163) modbus: add: 0, length: 10
I (33163) modbus: Read Holding Registers
I (33633) example: cur_pulse_count:-251
I (34083) modbus tcp: ModBusSlave_recv()
I (34083) modbus: ModbusSlaveProcess()---------------------------
I (34083) modbus: check id...
I (34083) modbus: ok
I (34083) modbus: add: 0, length: 10
I (34083) modbus: Read Holding Registers
I (34633) example: cur_pulse_count:-251
I (35103) modbus tcp: ModBusSlave_recv()
I (35103) modbus: ModbusSlaveProcess()---------------------------
I (35103) modbus: check id...
I (35103) modbus: ok
I (35103) modbus: add: 0, length: 10
I (35103) modbus: Read Holding Registers
I (35633) example: cur_pulse_count:-251
I (36133) modbus tcp: ModBusSlave_recv()
I (36133) modbus: ModbusSlaveProcess()---------------------------
I (36133) modbus: check id...
I (36133) modbus: ok
I (36143) modbus: add: 0, length: 10
I (36143) modbus: Read Holding Registers
I (36633) example: cur_pulse_count:-251
I (37153) modbus tcp: ModBusSlave_recv()
I (37153) modbus: ModbusSlaveProcess()---------------------------
I (37153) modbus: check id...
I (37153) modbus: ok
I (37153) modbus: add: 0, length: 10
I (37153) modbus: Read Holding Registers
I (37633) example: cur_pulse_count:-251
I (38173) modbus tcp: ModBusSlave_recv()
I (38173) modbus: ModbusSlaveProcess()---------------------------
I (38173) modbus: check id...
I (38173) modbus: ok
I (38183) modbus: add: 0, length: 10
I (38183) modbus: Read Holding Registers
I (38633) example: cur_pulse_count:-251
I (39313) modbus tcp: ModBusSlave_recv()
I (39313) modbus: ModbusSlaveProcess()---------------------------
I (39313) modbus: check id...
I (39313) modbus: ok
I (39313) modbus: add: 0, length: 10
I (39313) modbus: Read Holding Registers
I (39633) example: cur_pulse_count:-251
I (40323) modbus tcp: ModBusSlave_recv()
I (40323) modbus: ModbusSlaveProcess()---------------------------
I (40323) modbus: check id...
I (40323) modbus: ok
I (40323) modbus: add: 0, length: 10
I (40323) modbus: Read Holding Registers
I (40633) example: cur_pulse_count:-251
I (41293) modbus tcp: ModBusSlave_recv()
I (41293) modbus: ModbusSlaveProcess()---------------------------
I (41293) modbus: check id...
I (41293) modbus: ok
I (41293) modbus: add: 0, length: 10
I (41293) modbus: Read Holding Registers
I (41633) example: cur_pulse_count:-251
I (42363) modbus tcp: ModBusSlave_recv()
I (42363) modbus: ModbusSlaveProcess()---------------------------
I (42363) modbus: check id...
I (42363) modbus: ok
I (42363) modbus: add: 0, length: 10
I (42363) modbus: Read Holding Registers
I (42633) example: cur_pulse_count:-251
I (43303) modbus tcp: ModBusSlave_recv()
I (43303) modbus: ModbusSlaveProcess()---------------------------
I (43303) modbus: check id...
I (43303) modbus: ok
I (43303) modbus: add: 0, length: 10
I (43303) modbus: Read Holding Registers
I (43633) example: cur_pulse_count:-251
I (44333) modbus tcp: ModBusSlave_recv()
I (44333) modbus: ModbusSlaveProcess()---------------------------
I (44333) modbus: check id...
I (44333) modbus: ok
I (44333) modbus: add: 0, length: 10
I (44333) modbus: Read Holding Registers
I (44633) example: cur_pulse_count:-251
I (45383) modbus tcp: ModBusSlave_recv()
I (45383) modbus: ModbusSlaveProcess()---------------------------
I (45383) modbus: check id...
I (45383) modbus: ok
I (45383) modbus: add: 0, length: 10
I (45383) modbus: Read Holding Registers
I (45633) example: cur_pulse_count:-251
I (46373) modbus tcp: ModBusSlave_recv()
I (46373) modbus: ModbusSlaveProcess()---------------------------
I (46373) modbus: check id...
I (46373) modbus: ok
I (46373) modbus: add: 0, length: 10
I (46373) modbus: Read Holding Registers
I (46633) example: cur_pulse_count:-251
I (47293) modbus tcp: ModBusSlave_recv()
I (47293) modbus: ModbusSlaveProcess()---------------------------
I (47293) modbus: check id...
I (47293) modbus: ok
I (47293) modbus: add: 0, length: 10
I (47293) modbus: Read Holding Registers
I (47633) example: cur_pulse_count:-251
I (48343) modbus tcp: ModBusSlave_recv()
I (48343) modbus: ModbusSlaveProcess()---------------------------
I (48343) modbus: check id...
I (48343) modbus: ok
I (48343) modbus: add: 0, length: 10
I (48343) modbus: Read Holding Registers
I (48633) example: cur_pulse_count:-251
I (49333) modbus tcp: ModBusSlave_recv()
I (49343) modbus: ModbusSlaveProcess()---------------------------
I (49343) modbus: check id...
I (49343) modbus: ok
I (49343) modbus: add: 0, length: 10
I (49343) modbus: Read Holding Registers
I (49633) example: cur_pulse_count:-251
I (50363) modbus tcp: ModBusSlave_recv()
I (50363) modbus: ModbusSlaveProcess()---------------------------
I (50363) modbus: check id...
I (50363) modbus: ok
I (50363) modbus: add: 0, length: 10
I (50363) modbus: Read Holding Registers
I (50633) example: cur_pulse_count:-251
I (51383) modbus tcp: ModBusSlave_recv()
I (51383) modbus: ModbusSlaveProcess()---------------------------
I (51383) modbus: check id...
I (51383) modbus: ok
I (51383) modbus: add: 0, length: 10
I (51383) modbus: Read Holding Registers
I (51633) example: cur_pulse_count:-251
I (52633) example: cur_pulse_count:-251
I (52723) modbus tcp: ModBusSlave_recv()
I (52723) modbus: ModbusSlaveProcess()---------------------------
I (52723) modbus: check id...
I (52723) modbus: ok
I (52723) modbus: add: 0, length: 10
I (52723) modbus: Read Holding Registers
I (53433) modbus tcp: ModBusSlave_recv()
I (53433) modbus: ModbusSlaveProcess()---------------------------
I (53433) modbus: check id...
I (53433) modbus: ok
I (53433) modbus: add: 0, length: 10
I (53433) modbus: Read Holding Registers
I (53633) example: cur_pulse_count:-251
I (54463) modbus tcp: ModBusSlave_recv()
I (54463) modbus: ModbusSlaveProcess()---------------------------
I (54463) modbus: check id...
I (54463) modbus: ok
I (54463) modbus: add: 0, length: 10
I (54463) modbus: Read Holding Registers
I (54633) example: cur_pulse_count:-251
I (55633) example: cur_pulse_count:-251
I (55693) modbus tcp: ModBusSlave_recv()
I (55693) modbus: ModbusSlaveProcess()---------------------------
I (55693) modbus: check id...
I (55693) modbus: ok
I (55693) modbus: add: 0, length: 10
I (55693) modbus: Read Holding Registers
I (56513) modbus tcp: ModBusSlave_recv()
I (56513) modbus: ModbusSlaveProcess()---------------------------
I (56513) modbus: check id...
I (56513) modbus: ok
I (56513) modbus: add: 0, length: 10
I (56513) modbus: Read Holding Registers
I (56633) example: cur_pulse_count:-251
I (57533) modbus tcp: ModBusSlave_recv()
I (57533) modbus: ModbusSlaveProcess()---------------------------
I (57533) modbus: check id...
I (57533) modbus: ok
I (57533) modbus: add: 0, length: 10
I (57533) modbus: Read Holding Registers
I (57633) example: cur_pulse_count:-251
I (58553) modbus tcp: ModBusSlave_recv()
I (58553) modbus: ModbusSlaveProcess()---------------------------
I (58553) modbus: check id...
I (58553) modbus: ok
I (58553) modbus: add: 0, length: 10
I (58553) modbus: Read Holding Registers
I (58633) example: cur_pulse_count:-251
I (59473) modbus tcp: ModBusSlave_recv()
I (59473) modbus: ModbusSlaveProcess()---------------------------
I (59473) modbus: check id...
I (59473) modbus: ok
I (59473) modbus: add: 0, length: 10
I (59473) modbus: Read Holding Registers
I (59633) example: cur_pulse_count:-251
I (60503) modbus tcp: ModBusSlave_recv()
I (60503) modbus: ModbusSlaveProcess()---------------------------
I (60503) modbus: check id...
I (60503) modbus: ok
I (60503) modbus: add: 0, length: 10
I (60503) modbus: Read Holding Registers
I (60633) example: cur_pulse_count:-251
I (61523) modbus tcp: ModBusSlave_recv()
I (61523) modbus: ModbusSlaveProcess()---------------------------
I (61523) modbus: check id...
I (61523) modbus: ok
I (61523) modbus: add: 0, length: 10
I (61523) modbus: Read Holding Registers
I (61633) example: cur_pulse_count:-251
I (62553) modbus tcp: ModBusSlave_recv()
I (62553) modbus: ModbusSlaveProcess()---------------------------
I (62553) modbus: check id...
I (62553) modbus: ok
I (62553) modbus: add: 0, length: 10
I (62553) modbus: Read Holding Registers
I (62633) example: cur_pulse_count:-251
I (63363) modbus tcp: ModBusSlave_recv()
I (63363) modbus: ModbusSlaveProcess()---------------------------
I (63363) modbus: check id...
I (63363) modbus: ok
I (63363) modbus: add: 0, length: 10
I (63373) modbus: Read Holding Registers
I (63443) modbus tcp: ModBusSlave_recv()
I (63443) modbus: ModbusSlaveProcess()---------------------------
I (63443) modbus: check id...
I (63443) modbus: ok
I (63443) modbus: add: 0, length: 10
I (63443) modbus: Read Holding Registers
I (63583) modbus tcp: ModBusSlave_recv()
I (63583) modbus: ModbusSlaveProcess()---------------------------
I (63583) modbus: check id...
I (63583) modbus: ok
I (63583) modbus: add: 0, length: 10
I (63583) modbus: Read Holding Registers
I (63633) example: cur_pulse_count:-251
I (63783) modbus tcp: ModBusSlave_recv()
I (63783) modbus: ModbusSlaveProcess()---------------------------
I (63783) modbus: check id...
I (63783) modbus: ok
I (63783) modbus: add: 0, length: 10
I (63783) modbus: Read Holding Registers
I (63803) modbus tcp: ModBusSlave_recv()
I (63803) modbus: ModbusSlaveProcess()---------------------------
I (63803) modbus: check id...
I (63803) modbus: ok
I (63803) modbus: add: 0, length: 10
I (63803) modbus: Read Holding Registers
I (63923) modbus tcp: ModBusSlave_recv()
I (63923) modbus: ModbusSlaveProcess()---------------------------
I (63923) modbus: check id...
I (63923) modbus: ok
I (63923) modbus: add: 0, length: 10
I (63923) modbus: Read Holding Registers
I (64013) modbus tcp: ModBusSlave_recv()
I (64013) modbus: ModbusSlaveProcess()---------------------------
I (64013) modbus: check id...
I (64013) modbus: ok
I (64013) modbus: add: 0, length: 10
I (64013) modbus: Read Holding Registers
I (64173) modbus tcp: ModBusSlave_recv()
I (64173) modbus: ModbusSlaveProcess()---------------------------
I (64173) modbus: check id...
I (64173) modbus: ok
I (64173) modbus: add: 0, length: 10
I (64173) modbus: Read Holding Registers
I (64263) modbus tcp: ModBusSlave_recv()
I (64263) modbus: ModbusSlaveProcess()---------------------------
I (64263) modbus: check id...
I (64263) modbus: ok
I (64263) modbus: add: 0, length: 10
I (64263) modbus: Read Holding Registers
I (64393) modbus tcp: ModBusSlave_recv()
I (64393) modbus: ModbusSlaveProcess()---------------------------
I (64393) modbus: check id...
I (64393) modbus: ok
I (64393) modbus: add: 0, length: 10
I (64393) modbus: Read Holding Registers
I (64483) modbus tcp: ModBusSlave_recv()
I (64483) modbus: ModbusSlaveProcess()---------------------------
I (64483) modbus: check id...
I (64483) modbus: ok
I (64483) modbus: add: 0, length: 10
I (64483) modbus: Read Holding Registers
I (64603) modbus tcp: ModBusSlave_recv()
I (64613) modbus: ModbusSlaveProcess()---------------------------
I (64613) modbus: check id...
I (64613) modbus: ok
I (64613) modbus: add: 0, length: 10
I (64613) modbus: Read Holding Registers
I (64633) example: cur_pulse_count:-251
I (64703) modbus tcp: ModBusSlave_recv()
I (64703) modbus: ModbusSlaveProcess()---------------------------
I (64703) modbus: check id...
I (64703) modbus: ok
I (64703) modbus: add: 0, length: 10
I (64703) modbus: Read Holding Registers
I (64813) modbus tcp: ModBusSlave_recv()
I (64813) modbus: ModbusSlaveProcess()---------------------------
I (64813) modbus: check id...
I (64813) modbus: ok
I (64813) modbus: add: 0, length: 10
I (64813) modbus: Read Holding Registers
I (64923) modbus tcp: ModBusSlave_recv()
I (64923) modbus: ModbusSlaveProcess()---------------------------
I (64923) modbus: check id...
I (64923) modbus: ok
I (64923) modbus: add: 0, length: 10
I (64923) modbus: Read Holding Registers
I (65243) modbus tcp: ModBusSlave_recv()
I (65243) modbus: ModbusSlaveProcess()---------------------------
I (65243) modbus: check id...
I (65243) modbus: ok
I (65243) modbus: add: 0, length: 10
I (65243) modbus: Read Holding Registers
I (65273) modbus tcp: ModBusSlave_recv()
I (65283) modbus: ModbusSlaveProcess()---------------------------
I (65283) modbus: check id...
I (65283) modbus: ok
I (65283) modbus: add: 0, length: 10
I (65283) modbus: Read Holding Registers
I (65383) modbus tcp: ModBusSlave_recv()
I (65383) modbus: ModbusSlaveProcess()---------------------------
I (65383) modbus: check id...
I (65383) modbus: ok
I (65383) modbus: add: 0, length: 10
I (65383) modbus: Read Holding Registers
I (65543) modbus tcp: ModBusSlave_recv()
I (65543) modbus: ModbusSlaveProcess()---------------------------
I (65543) modbus: check id...
I (65543) modbus: ok
I (65543) modbus: add: 0, length: 10
I (65543) modbus: Read Holding Registers
I (65633) example: cur_pulse_count:-251
I (65653) modbus tcp: ModBusSlave_recv()
I (65653) modbus: ModbusSlaveProcess()---------------------------
I (65653) modbus: check id...
I (65653) modbus: ok
I (65653) modbus: add: 0, length: 10
I (65653) modbus: Read Holding Registers
I (65793) modbus tcp: ModBusSlave_recv()
I (65793) modbus: ModbusSlaveProcess()---------------------------
I (65793) modbus: check id...
I (65793) modbus: ok
I (65793) modbus: add: 0, length: 10
I (65793) modbus: Read Holding Registers
I (65903) modbus tcp: ModBusSlave_recv()
I (65903) modbus: ModbusSlaveProcess()---------------------------
I (65903) modbus: check id...
I (65903) modbus: ok
I (65903) modbus: add: 0, length: 10
I (65903) modbus: Read Holding Registers
I (65993) modbus tcp: ModBusSlave_recv()
I (65993) modbus: ModbusSlaveProcess()---------------------------
I (65993) modbus: check id...
I (65993) modbus: ok
I (65993) modbus: add: 0, length: 10
I (65993) modbus: Read Holding Registers
I (66193) modbus tcp: ModBusSlave_recv()
I (66203) modbus: ModbusSlaveProcess()---------------------------
I (66203) modbus: check id...
I (66203) modbus: ok
I (66203) modbus: add: 0, length: 10
I (66203) modbus: Read Holding Registers
I (66213) modbus tcp: ModBusSlave_recv()
I (66213) modbus: ModbusSlaveProcess()---------------------------
I (66213) modbus: check id...
I (66213) modbus: ok
I (66213) modbus: add: 0, length: 10
I (66213) modbus: Read Holding Registers
I (66343) modbus tcp: ModBusSlave_recv()
I (66343) modbus: ModbusSlaveProcess()---------------------------
I (66343) modbus: check id...
I (66343) modbus: ok
I (66343) modbus: add: 0, length: 10
I (66343) modbus: Read Holding Registers
I (66433) modbus tcp: ModBusSlave_recv()
I (66443) modbus: ModbusSlaveProcess()---------------------------
I (66443) modbus: check id...
I (66443) modbus: ok
I (66443) modbus: add: 0, length: 10
I (66443) modbus: Read Holding Registers
I (66553) modbus tcp: ModBusSlave_recv()
I (66553) modbus: ModbusSlaveProcess()---------------------------
I (66553) modbus: check id...
I (66553) modbus: ok
I (66553) modbus: add: 0, length: 10
I (66553) modbus: Read Holding Registers
I (66633) example: cur_pulse_count:-251
I (66753) modbus tcp: ModBusSlave_recv()
I (66753) modbus: ModbusSlaveProcess()---------------------------
I (66753) modbus: check id...
I (66753) modbus: ok
I (66753) modbus: add: 0, length: 10
I (66753) modbus: Read Holding Registers
I (66793) modbus tcp: ModBusSlave_recv()
I (66793) modbus: ModbusSlaveProcess()---------------------------
I (66793) modbus: check id...
I (66793) modbus: ok
I (66793) modbus: add: 0, length: 10
I (66793) modbus: Read Holding Registers
I (66903) modbus tcp: ModBusSlave_recv()
I (66903) modbus: ModbusSlaveProcess()---------------------------
I (66903) modbus: check id...
I (66903) modbus: ok
I (66903) modbus: add: 0, length: 10
I (66903) modbus: Read Holding Registers
I (67033) modbus tcp: ModBusSlave_recv()
I (67033) modbus: ModbusSlaveProcess()---------------------------
I (67033) modbus: check id...
I (67033) modbus: ok
I (67033) modbus: add: 0, length: 10
I (67033) modbus: Read Holding Registers
I (67143) modbus tcp: ModBusSlave_recv()
I (67143) modbus: ModbusSlaveProcess()---------------------------
I (67143) modbus: check id...
I (67143) modbus: ok
I (67143) modbus: add: 0, length: 10
I (67143) modbus: Read Holding Registers
I (67313) modbus tcp: ModBusSlave_recv()
I (67313) modbus: ModbusSlaveProcess()---------------------------
I (67313) modbus: check id...
I (67313) modbus: ok
I (67313) modbus: add: 0, length: 10
I (67313) modbus: Read Holding Registers
I (67373) modbus tcp: ModBusSlave_recv()
I (67373) modbus: ModbusSlaveProcess()---------------------------
I (67373) modbus: check id...
I (67373) modbus: ok
I (67373) modbus: add: 0, length: 10
I (67373) modbus: Read Holding Registers
I (67473) modbus tcp: ModBusSlave_recv()
I (67473) modbus: ModbusSlaveProcess()---------------------------
I (67473) modbus: check id...
I (67473) modbus: ok
I (67473) modbus: add: 0, length: 10
I (67473) modbus: Read Holding Registers
I (67593) modbus tcp: ModBusSlave_recv()
I (67593) modbus: ModbusSlaveProcess()---------------------------
I (67593) modbus: check id...
I (67593) modbus: ok
I (67593) modbus: add: 0, length: 10
I (67593) modbus: Read Holding Registers
I (67633) example: cur_pulse_count:-309
I (67693) modbus tcp: ModBusSlave_recv()
I (67693) modbus: ModbusSlaveProcess()---------------------------
I (67693) modbus: check id...
I (67693) modbus: ok
I (67693) modbus: add: 0, length: 10
I (67693) modbus: Read Holding Registers
I (67873) modbus tcp: ModBusSlave_recv()
I (67873) modbus: ModbusSlaveProcess()---------------------------
I (67873) modbus: check id...
I (67873) modbus: ok
I (67873) modbus: add: 0, length: 10
I (67873) modbus: Read Holding Registers
I (67933) modbus tcp: ModBusSlave_recv()
I (67933) modbus: ModbusSlaveProcess()---------------------------
I (67933) modbus: check id...
I (67933) modbus: ok
I (67933) modbus: add: 0, length: 10
I (67933) modbus: Read Holding Registers
I (68083) modbus tcp: ModBusSlave_recv()
I (68083) modbus: ModbusSlaveProcess()---------------------------
I (68083) modbus: check id...
I (68083) modbus: ok
I (68083) modbus: add: 0, length: 10
I (68083) modbus: Read Holding Registers
I (68373) modbus tcp: ModBusSlave_recv()
I (68373) modbus: ModbusSlaveProcess()---------------------------
I (68383) modbus: check id...
I (68383) modbus: ok
I (68383) modbus: add: 0, length: 10
I (68383) modbus: Read Holding Registers
I (68393) modbus tcp: ModBusSlave_recv()
I (68393) modbus: ModbusSlaveProcess()---------------------------
I (68393) modbus: check id...
I (68393) modbus: ok
I (68393) modbus: add: 0, length: 10
I (68393) modbus: Read Holding Registers
I (68523) modbus tcp: ModBusSlave_recv()
I (68523) modbus: ModbusSlaveProcess()---------------------------
I (68533) modbus: check id...
I (68533) modbus: ok
I (68533) modbus: add: 0, length: 10
I (68533) modbus: Read Holding Registers
I (68633) example: cur_pulse_count:-249
I (68633) modbus tcp: ModBusSlave_recv()
I (68633) modbus: ModbusSlaveProcess()---------------------------
I (68633) modbus: check id...
I (68633) modbus: ok
I (68633) modbus: add: 0, length: 10
I (68633) modbus: Read Holding Registers
I (68793) modbus tcp: ModBusSlave_recv()
I (68793) modbus: ModbusSlaveProcess()---------------------------
I (68793) modbus: check id...
I (68793) modbus: ok
I (68793) modbus: add: 0, length: 10
I (68793) modbus: Read Holding Registers
I (68843) modbus tcp: ModBusSlave_recv()
I (68843) modbus: ModbusSlaveProcess()---------------------------
I (68843) modbus: check id...
I (68843) modbus: ok
I (68843) modbus: add: 0, length: 10
I (68843) modbus: Read Holding Registers
I (68953) modbus tcp: ModBusSlave_recv()
I (68953) modbus: ModbusSlaveProcess()---------------------------
I (68953) modbus: check id...
I (68953) modbus: ok
I (68953) modbus: add: 0, length: 10
I (68953) modbus: Read Holding Registers
I (69053) modbus tcp: ModBusSlave_recv()
I (69063) modbus: ModbusSlaveProcess()---------------------------
I (69063) modbus: check id...
I (69063) modbus: ok
I (69063) modbus: add: 0, length: 10
I (69063) modbus: Read Holding Registers
I (69263) modbus tcp: ModBusSlave_recv()
I (69263) modbus: ModbusSlaveProcess()---------------------------
I (69263) modbus: check id...
I (69263) modbus: ok
I (69263) modbus: add: 0, length: 10
I (69263) modbus: Read Holding Registers
I (69373) modbus tcp: ModBusSlave_recv()
I (69373) modbus: ModbusSlaveProcess()---------------------------
I (69373) modbus: check id...
I (69373) modbus: ok
I (69373) modbus: add: 0, length: 10
I (69373) modbus: Read Holding Registers
I (69483) modbus tcp: ModBusSlave_recv()
I (69483) modbus: ModbusSlaveProcess()---------------------------
I (69483) modbus: check id...
I (69483) modbus: ok
I (69483) modbus: add: 0, length: 10
I (69483) modbus: Read Holding Registers
I (69593) modbus tcp: ModBusSlave_recv()
I (69593) modbus: ModbusSlaveProcess()---------------------------
I (69593) modbus: check id...
I (69593) modbus: ok
I (69593) modbus: add: 0, length: 10
I (69593) modbus: Read Holding Registers
I (69633) example: cur_pulse_count:-359
I (69703) modbus tcp: ModBusSlave_recv()
I (69703) modbus: ModbusSlaveProcess()---------------------------
I (69703) modbus: check id...
I (69703) modbus: ok
I (69703) modbus: add: 0, length: 10
I (69703) modbus: Read Holding Registers
I (69813) modbus tcp: ModBusSlave_recv()
I (69813) modbus: ModbusSlaveProcess()---------------------------
I (69813) modbus: check id...
I (69813) modbus: ok
I (69813) modbus: add: 0, length: 10
I (69823) modbus: Read Holding Registers
I (69923) modbus tcp: ModBusSlave_recv()
I (69923) modbus: ModbusSlaveProcess()---------------------------
I (69923) modbus: check id...
I (69923) modbus: ok
I (69923) modbus: add: 0, length: 10
I (69923) modbus: Read Holding Registers
I (70033) modbus tcp: ModBusSlave_recv()
I (70033) modbus: ModbusSlaveProcess()---------------------------
I (70033) modbus: check id...
I (70033) modbus: ok
I (70033) modbus: add: 0, length: 10
I (70033) modbus: Read Holding Registers
I (70223) modbus tcp: ModBusSlave_recv()
I (70233) modbus: ModbusSlaveProcess()---------------------------
I (70233) modbus: check id...
I (70233) modbus: ok
I (70233) modbus: add: 0, length: 10
I (70233) modbus: Read Holding Registers
I (70253) modbus tcp: ModBusSlave_recv()
I (70253) modbus: ModbusSlaveProcess()---------------------------
I (70253) modbus: check id...
I (70253) modbus: ok
I (70253) modbus: add: 0, length: 10
I (70253) modbus: Read Holding Registers
I (70453) modbus tcp: ModBusSlave_recv()
I (70453) modbus: ModbusSlaveProcess()---------------------------
I (70453) modbus: check id...
I (70453) modbus: ok
I (70453) modbus: add: 0, length: 10
I (70453) modbus: Read Holding Registers
I (70543) modbus tcp: ModBusSlave_recv()
I (70543) modbus: ModbusSlaveProcess()---------------------------
I (70543) modbus: check id...
I (70543) modbus: ok
I (70543) modbus: add: 0, length: 10
I (70543) modbus: Read Holding Registers
I (70633) example: cur_pulse_count:-359
I (70653) modbus tcp: ModBusSlave_recv()
I (70663) modbus: ModbusSlaveProcess()---------------------------
I (70663) modbus: check id...
I (70663) modbus: ok
I (70663) modbus: add: 0, length: 10
I (70663) modbus: Read Holding Registers
I (70763) modbus tcp: ModBusSlave_recv()
I (70763) modbus: ModbusSlaveProcess()---------------------------
I (70763) modbus: check id...
I (70763) modbus: ok
I (70763) modbus: add: 0, length: 10
I (70763) modbus: Read Holding Registers
I (70943) modbus tcp: ModBusSlave_recv()
I (70943) modbus: ModbusSlaveProcess()---------------------------
I (70943) modbus: check id...
I (70953) modbus: ok
I (70953) modbus: add: 0, length: 10
I (70953) modbus: Read Holding Registers
I (70983) modbus tcp: ModBusSlave_recv()
I (70983) modbus: ModbusSlaveProcess()---------------------------
I (70983) modbus: check id...
I (70983) modbus: ok
I (70983) modbus: add: 0, length: 10
I (70983) modbus: Read Holding Registers
I (71153) modbus tcp: ModBusSlave_recv()
I (71153) modbus: ModbusSlaveProcess()---------------------------
I (71153) modbus: check id...
I (71153) modbus: ok
I (71153) modbus: add: 0, length: 10
I (71153) modbus: Read Holding Registers
I (71283) modbus tcp: ModBusSlave_recv()
I (71283) modbus: ModbusSlaveProcess()---------------------------
I (71283) modbus: check id...
I (71283) modbus: ok
I (71283) modbus: add: 0, length: 10
I (71283) modbus: Read Holding Registers
I (71313) modbus tcp: ModBusSlave_recv()
I (71323) modbus: ModbusSlaveProcess()---------------------------
I (71323) modbus: check id...
I (71323) modbus: ok
I (71323) modbus: add: 0, length: 10
I (71323) modbus: Read Holding Registers
I (71423) modbus tcp: ModBusSlave_recv()
I (71423) modbus: ModbusSlaveProcess()---------------------------
I (71423) modbus: check id...
I (71423) modbus: ok
I (71423) modbus: add: 0, length: 10
I (71423) modbus: Read Holding Registers
I (71573) modbus tcp: ModBusSlave_recv()
I (71573) modbus: ModbusSlaveProcess()---------------------------
I (71573) modbus: check id...
I (71573) modbus: ok
I (71573) modbus: add: 0, length: 10
I (71573) modbus: Read Holding Registers
I (71633) example: cur_pulse_count:-359
I (71643) modbus tcp: ModBusSlave_recv()
I (71643) modbus: ModbusSlaveProcess()---------------------------
I (71643) modbus: check id...
I (71643) modbus: ok
I (71643) modbus: add: 0, length: 10
I (71643) modbus: Read Holding Registers
I (71753) modbus tcp: ModBusSlave_recv()
I (71753) modbus: ModbusSlaveProcess()---------------------------
I (71753) modbus: check id...
I (71753) modbus: ok
I (71753) modbus: add: 0, length: 10
I (71753) modbus: Read Holding Registers
I (71863) modbus tcp: ModBusSlave_recv()
I (71863) modbus: ModbusSlaveProcess()---------------------------
I (71863) modbus: check id...
I (71863) modbus: ok
I (71863) modbus: add: 0, length: 10
I (71863) modbus: Read Holding Registers
I (71983) modbus tcp: ModBusSlave_recv()
I (71983) modbus: ModbusSlaveProcess()---------------------------
I (71983) modbus: check id...
I (71983) modbus: ok
I (71983) modbus: add: 0, length: 10
I (71983) modbus: Read Holding Registers
I (72093) modbus tcp: ModBusSlave_recv()
I (72093) modbus: ModbusSlaveProcess()---------------------------
I (72093) modbus: check id...
I (72093) modbus: ok
I (72093) modbus: add: 0, length: 10
I (72093) modbus: Read Holding Registers
I (72193) modbus tcp: ModBusSlave_recv()
I (72193) modbus: ModbusSlaveProcess()---------------------------
I (72203) modbus: check id...
I (72203) modbus: ok
I (72203) modbus: add: 0, length: 10
I (72203) modbus: Read Holding Registers
I (72503) modbus tcp: ModBusSlave_recv()
I (72503) modbus: ModbusSlaveProcess()---------------------------
I (72503) modbus: check id...
I (72503) modbus: ok
I (72503) modbus: add: 0, length: 10
I (72503) modbus: Read Holding Registers
I (72593) modbus tcp: ModBusSlave_recv()
I (72593) modbus: ModbusSlaveProcess()---------------------------
I (72593) modbus: check id...
I (72593) modbus: ok
I (72593) modbus: add: 0, length: 10
I (72593) modbus: Read Holding Registers
I (72633) example: cur_pulse_count:-359
I (72703) modbus tcp: ModBusSlave_recv()
I (72703) modbus: ModbusSlaveProcess()---------------------------
I (72703) modbus: check id...
I (72703) modbus: ok
I (72703) modbus: add: 0, length: 10
I (72703) modbus: Read Holding Registers
I (72833) modbus tcp: ModBusSlave_recv()
I (72833) modbus: ModbusSlaveProcess()---------------------------
I (72833) modbus: check id...
I (72833) modbus: ok
I (72833) modbus: add: 0, length: 10
I (72833) modbus: Read Holding Registers
I (72943) modbus tcp: ModBusSlave_recv()
I (72943) modbus: ModbusSlaveProcess()---------------------------
I (72943) modbus: check id...
I (72943) modbus: ok
I (72943) modbus: add: 0, length: 10
I (72943) modbus: Read Holding Registers
I (73053) modbus tcp: ModBusSlave_recv()
I (73053) modbus: ModbusSlaveProcess()---------------------------
I (73053) modbus: check id...
I (73053) modbus: ok
I (73053) modbus: add: 0, length: 10
I (73053) modbus: Read Holding Registers
I (73203) modbus tcp: ModBusSlave_recv()
I (73203) modbus: ModbusSlaveProcess()---------------------------
I (73203) modbus: check id...
I (73203) modbus: ok
I (73203) modbus: add: 0, length: 10
I (73203) modbus: Read Holding Registers
I (73283) modbus tcp: ModBusSlave_recv()
I (73283) modbus: ModbusSlaveProcess()---------------------------
I (73283) modbus: check id...
I (73283) modbus: ok
I (73283) modbus: add: 0, length: 10
I (73283) modbus: Read Holding Registers
I (73393) modbus tcp: ModBusSlave_recv()
I (73393) modbus: ModbusSlaveProcess()---------------------------
I (73393) modbus: check id...
I (73393) modbus: ok
I (73393) modbus: add: 0, length: 10
I (73393) modbus: Read Holding Registers
I (73633) example: cur_pulse_count:-359
I (73633) modbus tcp: ModBusSlave_recv()
I (73633) modbus: ModbusSlaveProcess()---------------------------
I (73633) modbus: check id...
I (73633) modbus: ok
I (73633) modbus: add: 0, length: 10
I (73633) modbus: Read Holding Registers
I (73773) modbus tcp: ModBusSlave_recv()
I (73773) modbus: ModbusSlaveProcess()---------------------------
I (73773) modbus: check id...
I (73773) modbus: ok
I (73773) modbus: add: 0, length: 10
I (73773) modbus: Read Holding Registers
I (73903) modbus tcp: ModBusSlave_recv()
I (73903) modbus: ModbusSlaveProcess()---------------------------
I (73903) modbus: check id...
I (73903) modbus: ok
I (73903) modbus: add: 0, length: 10
I (73903) modbus: Read Holding Registers
I (74003) modbus tcp: ModBusSlave_recv()
I (74003) modbus: ModbusSlaveProcess()---------------------------
I (74003) modbus: check id...
I (74003) modbus: ok
I (74003) modbus: add: 0, length: 10
I (74003) modbus: Read Holding Registers
I (74103) modbus tcp: ModBusSlave_recv()
I (74103) modbus: ModbusSlaveProcess()---------------------------
I (74113) modbus: check id...
I (74113) modbus: ok
I (74113) modbus: add: 0, length: 10
I (74113) modbus: Read Holding Registers
I (74323) modbus tcp: ModBusSlave_recv()
I (74323) modbus: ModbusSlaveProcess()---------------------------
I (74323) modbus: check id...
I (74323) modbus: ok
I (74323) modbus: add: 0, length: 10
I (74323) modbus: Read Holding Registers
I (74343) modbus tcp: ModBusSlave_recv()
I (74343) modbus: ModbusSlaveProcess()---------------------------
I (74343) modbus: check id...
I (74343) modbus: ok
I (74343) modbus: add: 0, length: 10
I (74343) modbus: Read Holding Registers
I (74533) modbus tcp: ModBusSlave_recv()
I (74533) modbus: ModbusSlaveProcess()---------------------------
I (74533) modbus: check id...
I (74533) modbus: ok
I (74533) modbus: add: 0, length: 10
I (74533) modbus: Read Holding Registers
I (74563) modbus tcp: ModBusSlave_recv()
I (74563) modbus: ModbusSlaveProcess()---------------------------
I (74563) modbus: check id...
I (74563) modbus: ok
I (74563) modbus: add: 0, length: 10
I (74563) modbus: Read Holding Registers
I (74633) example: cur_pulse_count:-359
I (74673) modbus tcp: ModBusSlave_recv()
I (74673) modbus: ModbusSlaveProcess()---------------------------
I (74673) modbus: check id...
I (74673) modbus: ok
I (74673) modbus: add: 0, length: 10
I (74673) modbus: Read Holding Registers
I (74783) modbus tcp: ModBusSlave_recv()
I (74783) modbus: ModbusSlaveProcess()---------------------------
I (74783) modbus: check id...
I (74783) modbus: ok
I (74783) modbus: add: 0, length: 10
I (74783) modbus: Read Holding Registers
I (74973) modbus tcp: ModBusSlave_recv()
I (74973) modbus: ModbusSlaveProcess()---------------------------
I (74973) modbus: check id...
I (74973) modbus: ok
I (74973) modbus: add: 0, length: 10
I (74973) modbus: Read Holding Registers
I (75003) modbus tcp: ModBusSlave_recv()
I (75003) modbus: ModbusSlaveProcess()---------------------------
I (75003) modbus: check id...
I (75003) modbus: ok
I (75003) modbus: add: 0, length: 10
I (75003) modbus: Read Holding Registers
I (75113) modbus tcp: ModBusSlave_recv()
I (75113) modbus: ModbusSlaveProcess()---------------------------
I (75113) modbus: check id...
I (75123) modbus: ok
I (75123) modbus: add: 0, length: 10
I (75123) modbus: Read Holding Registers
I (75243) modbus tcp: ModBusSlave_recv()
I (75243) modbus: ModbusSlaveProcess()---------------------------
I (75243) modbus: check id...
I (75243) modbus: ok
I (75243) modbus: add: 0, length: 10
I (75243) modbus: Read Holding Registers
I (75343) modbus tcp: ModBusSlave_recv()
I (75353) modbus: ModbusSlaveProcess()---------------------------
I (75353) modbus: check id...
I (75353) modbus: ok
I (75353) modbus: add: 0, length: 10
I (75353) modbus: Read Holding Registers
I (75443) modbus tcp: ModBusSlave_recv()
I (75443) modbus: ModbusSlaveProcess()---------------------------
I (75443) modbus: check id...
I (75443) modbus: ok
I (75443) modbus: add: 0, length: 10
I (75443) modbus: Read Holding Registers
I (75563) modbus tcp: ModBusSlave_recv()
I (75563) modbus: ModbusSlaveProcess()---------------------------
I (75563) modbus: check id...
I (75563) modbus: ok
I (75563) modbus: add: 0, length: 10
I (75563) modbus: Read Holding Registers
I (75633) example: cur_pulse_count:-359
I (75763) modbus tcp: ModBusSlave_recv()
I (75763) modbus: ModbusSlaveProcess()---------------------------
I (75763) modbus: check id...
I (75763) modbus: ok
I (75763) modbus: add: 0, length: 10
I (75763) modbus: Read Holding Registers
I (75793) modbus tcp: ModBusSlave_recv()
I (75793) modbus: ModbusSlaveProcess()---------------------------
I (75793) modbus: check id...
I (75793) modbus: ok
I (75793) modbus: add: 0, length: 10
I (75793) modbus: Read Holding Registers
I (75883) modbus tcp: ModBusSlave_recv()
I (75883) modbus: ModbusSlaveProcess()---------------------------
I (75883) modbus: check id...
I (75883) modbus: ok
I (75883) modbus: add: 0, length: 10
I (75883) modbus: Read Holding Registers
I (76003) modbus tcp: ModBusSlave_recv()
I (76003) modbus: ModbusSlaveProcess()---------------------------
I (76003) modbus: check id...
I (76003) modbus: ok
I (76003) modbus: add: 0, length: 10
I (76003) modbus: Read Holding Registers
I (76153) modbus tcp: ModBusSlave_recv()
I (76153) modbus: ModbusSlaveProcess()---------------------------
I (76153) modbus: check id...
I (76153) modbus: ok
I (76153) modbus: add: 0, length: 10
I (76153) modbus: Read Holding Registers
I (76253) modbus tcp: ModBusSlave_recv()
I (76253) modbus: ModbusSlaveProcess()---------------------------
I (76253) modbus: check id...
I (76253) modbus: ok
I (76253) modbus: add: 0, length: 10
I (76253) modbus: Read Holding Registers
I (76353) modbus tcp: ModBusSlave_recv()
I (76353) modbus: ModbusSlaveProcess()---------------------------
I (76353) modbus: check id...
I (76353) modbus: ok
I (76353) modbus: add: 0, length: 10
I (76363) modbus: Read Holding Registers
I (76493) modbus tcp: ModBusSlave_recv()
I (76493) modbus: ModbusSlaveProcess()---------------------------
I (76493) modbus: check id...
I (76493) modbus: ok
I (76493) modbus: add: 0, length: 10
I (76493) modbus: Read Holding Registers
I (76633) example: cur_pulse_count:-359
I (76703) modbus tcp: ModBusSlave_recv()
I (76703) modbus: ModbusSlaveProcess()---------------------------
I (76703) modbus: check id...
I (76703) modbus: ok
I (76713) modbus: add: 0, length: 10
I (76713) modbus: Read Holding Registers
I (76733) modbus tcp: ModBusSlave_recv()
I (76743) modbus: ModbusSlaveProcess()---------------------------
I (76743) modbus: check id...
I (76743) modbus: ok
I (76743) modbus: add: 0, length: 10
I (76743) modbus: Read Holding Registers
I (76843) modbus tcp: ModBusSlave_recv()
I (76843) modbus: ModbusSlaveProcess()---------------------------
I (76843) modbus: check id...
I (76843) modbus: ok
I (76843) modbus: add: 0, length: 10
I (76843) modbus: Read Holding Registers