90 lines
2.3 KiB
C
90 lines
2.3 KiB
C
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/semphr.h"
|
|
#include "esp_err.h"
|
|
#include "esp_timer.h"
|
|
#include "stdlib.h"
|
|
#include "config.h"
|
|
#include "utils.h"
|
|
#include "ads1220.h"
|
|
#include "fram.h"
|
|
|
|
#include "rotary_encoder.h"
|
|
#include "esp_log.h"
|
|
#include "esp_check.h"
|
|
#include "soc/rtc.h"
|
|
#include "driver/mcpwm.h"
|
|
// #include "driver/mcpwm_prelude.h"
|
|
// #include "bt_server.h"
|
|
// #include "../ble_gatts_server.h"
|
|
|
|
#include "esp_system.h"
|
|
#include "driver/uart.h"
|
|
#include "string.h"
|
|
#include "driver/gpio.h"
|
|
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
|
|
static const char *TAG = "depth";
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t capture_signal;
|
|
mcpwm_capture_signal_t sel_cap_signal;
|
|
} capture;
|
|
|
|
typedef struct capture_event
|
|
{
|
|
int ch;
|
|
uint32_t val;
|
|
} capture_event_t;
|
|
|
|
// #define DEPTH_PIN_CLK GPIO_NUM_36 // 捕获GPIO端口
|
|
// #define GPIO_PCNT_PIN_1 36 // Set GPIO 18 as phaseA/C1
|
|
// #define GPIO_PCNT_PIN_2 35 // Set GPIO 19 as phaseB/C2
|
|
// #define DEPTH_PIN_PULSE 36 //深度脉冲GPIO端口
|
|
// #define DEPTH_PIN_CTRL 35 //深度控制GPIO端口
|
|
|
|
#define FLOW_SYNC_PIN 7 // 捕获GPIO端口 SPI2_nIRQ
|
|
|
|
#define DEPTH_PIN_PULSE 39 // 深度脉冲GPIO端口 TIM15_CH1
|
|
#define DEPTH_PIN_CTRL 38 // 深度控制GPIO端口 TIM15_CH2
|
|
#define DEPTH_PIN_ENC_A 42 // 深度脉冲GPIO端口 TIM3_CH1
|
|
#define DEPTH_PIN_ENC_B 41 // 深度控制GPIO端口 TIM3_CH2
|
|
#define SEND_DATA_TEST 0
|
|
|
|
#define PILE_STATE_STOP 0x0100
|
|
#define PILE_STATE_PAUSE 0x0200
|
|
#define PILE_STATE_WORK 0x0300
|
|
|
|
#define PILE_DIR_NONE 0x01
|
|
#define PILE_DIR_UP 0x02
|
|
#define PILE_DIR_DOWN 0x03
|
|
|
|
|
|
rotary_encoder_t *encoder_ = NULL; // 编码器测量深度参数
|
|
|
|
|
|
|
|
void pcnt_rotary_encoder_init_(void)
|
|
{
|
|
// Rotary encoder underlying device is represented by a PCNT unit in this example
|
|
uint32_t pcnt_unit = 0;
|
|
int pulse_pin;
|
|
int ctrl_pin;
|
|
|
|
pulse_pin = DEPTH_PIN_ENC_A;
|
|
ctrl_pin = DEPTH_PIN_ENC_B;
|
|
|
|
// Create rotary encoder instance
|
|
rotary_encoder_config_t config = ROTARY_ENCODER_DEFAULT_CONFIG((rotary_encoder_dev_t)pcnt_unit, pulse_pin, ctrl_pin);
|
|
config.flags = 0;
|
|
ESP_ERROR_CHECK(rotary_encoder_new_ec11(&config, &encoder_));
|
|
// Filter out glitch (1us)
|
|
ESP_ERROR_CHECK(encoder_->set_glitch_filter(encoder_, 10));
|
|
// Start encoder
|
|
ESP_ERROR_CHECK(encoder_->start(encoder_));
|
|
}
|