/*================================================================ Copyright (c) 2020 Quectel Wireless Solution, Co., Ltd. All Rights Reserved. Quectel Wireless Solution Proprietary and Confidential. =================================================================*/ /*================================================================= EDIT HISTORY FOR MODULE This section contains comments describing changes made to the module. Notice that changes are listed in reverse chronological order. WHEN WHO WHAT, WHERE, WHY ------------ ------- ------------------------------------------------------------------------------- =================================================================*/ #include #include #include #include "ql_app_feature_config.h" #include "ql_api_osi.h" #include "ql_log.h" #include "ql_pin_cfg.h" #include "nw_demo.h" #include "gpio_demo.h" #include "gpio_int_demo.h" #include "datacall_demo.h" #include "osi_demo.h" #include "ql_dev_demo.h" #include "adc_demo.h" #include "led_cfg_demo.h" #include "ql_sim_demo.h" #include "power_demo.h" #include "ql_api_dev.h" #ifdef QL_APP_FEATURE_USB #include "usb_demo.h" #endif #ifdef QL_APP_FEATURE_MMS #include "mms_demo.h" #endif #ifdef QL_APP_FEATURE_UART #include "uart_demo.h" #endif #ifdef QL_APP_FEATURE_RS485 #include "rs485_demo.h" #endif #ifdef QL_APP_FEATURE_AUDIO #include "audio_demo.h" #endif #ifdef QL_APP_FEATURE_LCD #include "lcd_demo.h" #endif #ifdef QL_APP_FEATURE_LVGL #include "lvgl_demo.h" #endif #ifdef QL_APP_FEATURE_HTTP #include "http_demo.h" #endif #ifdef QL_APP_FEATURE_FTP #include "ftp_demo.h" #endif #ifdef QL_APP_FEATURE_MQTT #include "mqtt_demo.h" #endif #ifdef QL_APP_FEATURE_SSL #include "ssl_demo.h" #endif #ifdef QL_APP_FEATURE_PING #include "ping_demo.h" #endif #ifdef QL_APP_FEATURE_NTP #include "ntp_demo.h" #endif #ifdef QL_APP_FEATURE_LBS #include "lbs_demo.h" #endif #ifdef QL_APP_FEATURE_QTHSDK #include "qthsdk_demo.h" #endif #ifdef QL_APP_FEATURE_SOCKET #include "socket_demo.h" #endif #ifdef QL_APP_FEATURE_FILE_ZIP #include "zip_demo.h" #endif #ifdef QL_APP_FEATURE_BT #ifdef QL_APP_FEATURE_BT_SPP #include "bt_spp_demo.h" #endif #ifdef QL_APP_FEATURE_BT_HFP #include "bt_hfp_demo.h" #endif #ifdef QL_APP_FEATURE_BT_A2DP_AVRCP #include "bt_a2dp_avrcp_demo.h" #endif #ifdef QL_APP_FEATURE_BLE_GATT #include "ble_gatt_demo.h" #include "ble_hid_demo.h" #endif #endif #ifdef QL_APP_FEATURE_FILE #include "ql_fs_demo.h" #endif #ifdef QL_APP_FEATURE_SMS #include "sms_demo.h" #endif #ifdef QL_APP_FEATURE_VOICE_CALL #include "voice_call_demo.h" #endif #ifdef QL_APP_FEATURE_GNSS #include "gnss_demo.h" #endif #ifdef QL_APP_FEATURE_SPI #include "spi_demo.h" #endif #ifdef QL_APP_FEATURE_SPI_NOR_FLASH #include "spi_nor_flash_demo.h" #endif #ifdef QL_APP_FEATURE_SPI4_EXT_NOR_SFFS #include "spi4_ext_nor_sffs_demo.h" #endif #ifdef QL_APP_FEATURE_SPI6_EXT_NOR #include "spi6_ext_nor_flash_demo.h" #endif #ifdef QL_APP_FEATURE_SPI_NAND_FLASH #include "spi_nand_flash_demo.h" #endif #ifdef QL_APP_FEATURE_CAMERA #include "camera_demo.h" #endif #ifdef QL_APP_FEATURE_WIFISCAN #include "wifi_scan_demo.h" #endif #ifdef QL_APP_FEATURE_HTTP_FOTA #include "fota_http_demo.h" #endif #ifdef QL_APP_FEATURE_FTP_FOTA #include "fota_ftp_demo.h" #endif #ifdef QL_APP_FEATURE_DECODER #include "decoder_demo.h" #endif #ifdef QL_APP_FEATURE_APP_IMG_AT #include "app_img_at_demo.h" #endif #ifdef QL_APP_FEATURE_VOLTE #include "volte_demo.h" #endif #ifdef QL_APP_FEATURE_VSIM_ADAPT #include "vsim_adapt_demo.h" #endif #ifdef QL_APP_FEATURE_KEYPAD #include "keypad_demo.h" #endif #ifdef QL_APP_FEATURE_RTC #include "ql_rtc_demo.h" #endif #ifdef QL_APP_FEATURE_SECURE_BOOT #include "ql_api_dev.h" #endif #ifdef QL_APP_FEATURE_USB_CHARGE #include "charge_demo.h" #endif #ifdef QL_APP_FEATURE_QCLOUD_IOT #include "qcloud_demo.h" #endif #ifdef QL_APP_FEATURE_VIRT_AT #include "ql_virt_at_demo.h" #endif #ifdef QL_APP_FEATURE_TTS #include "tts_demo.h" #endif #ifdef QL_APP_FEATURE_I2C #include "I2C_demo.h" #endif #ifdef QL_APP_FEATURE_PBK #include "ql_pbk_demo.h" #endif #ifdef QL_APP_FEATURE_SDMMC #include "ql_sdmmc_demo.h" #endif #ifdef QL_APP_FEATURE_ALI_LINKSDK #include "ali_demo.h" #endif #ifdef QL_APP_FEATURE_USBNET #include "usbnet_demo.h" #endif #ifdef QL_APP_FEATURE_FS_NAND_FLASH #include "fs_nand_flash_demo.h" #endif #ifdef QL_APP_FEATURE_FS_NOR_FLASH #include "fs_nor_flash_demo.h" #endif #ifdef QL_APP_FEATURE_SFTP #include "sftp_demo.h" #endif #ifdef QL_APP_FEATURE_MXML #include "mxml_demo.h" #endif #ifdef QL_APP_FEATURE_CLOUDOTA #include "cloudota_demo.h" #endif #ifdef QL_APP_FEATURE_EMBED_NOR_FLASH #include "embed_nor_flash_demo.h" #endif #ifdef QL_APP_FEATURE_HILINK #include "hilink.h" #endif #ifdef QL_APP_FEATURE_PSM #include "psm_demo.h" #endif #ifdef QL_APP_FEATURE_STK #include "stk_demo.h" #endif #ifdef QL_APP_FEATURE_GPRS_DATA_TRANSFER #include "gprs_data_transfer_demo.h" #endif #ifdef QL_APP_FEATURE_TP #include "tp_demo.h" #endif #ifdef QL_APP_FEATURE_ALIOTSMARTCARD #include "aliotsmartcard_demo.h" #endif #ifdef QL_APP_FEATURE_MIPI_LCD #include "mipi_lcd_demo.h" #endif #ifdef QL_APP_FEATURE_ALIPAY_IOT_SDK extern void ql_alipay_iot_sdk_app_init(void); #endif #ifdef QL_APP_FEATURE_NTRIP_RTK #include "ntrip_rtk_demo.h" #endif #ifdef QL_APP_FEATURE_LWM2M #include "lwm2m_client_demo.h" #endif #ifdef QL_APP_FEATURE_SS #include "ussd_demo.h" #endif #ifdef QL_APP_FEATURE_ETHERNET #include "ethernet_demo.h" #endif #ifdef QL_APP_FEATURE_WEBSOCKET #include "websocket_demo.h" #endif #ifdef QL_APP_FEATURE_WIFI #include "wifi_demo.h" #endif /************************************************************************************************/ //#include "t2n_app.h" //#include "rtk_app.h" #include "ql_sdmmc.h" #include "lora_app.h" #include "lora_test.h" # include "esp32_iap_demo.h" /************************************************************************************************/ #define QL_INIT_LOG_LEVEL QL_LOG_LEVEL_INFO #define QL_INIT_LOG(msg, ...) QL_LOG(QL_INIT_LOG_LEVEL, "ql_INIT", msg, ##__VA_ARGS__) #define QL_INIT_LOG_PUSH(msg, ...) QL_LOG_PUSH("ql_INIT", msg, ##__VA_ARGS__) static void prvInvokeGlobalCtors(void) { extern void (*__init_array_start[])(); extern void (*__init_array_end[])(); size_t count = __init_array_end - __init_array_start; for (size_t i = 0; i < count; ++i) __init_array_start[i](); } void ql_pin_cfg_init(void) { uint8_t index = 0; uint8_t pin_num = 0; uint8_t default_func = 0; uint8_t gpio_func = 0; ql_GpioNum gpio_num = 0; ql_GpioDir gpio_dir = 0; ql_PullMode gpio_pull = 0; ql_LvlMode gpio_lvl = 0; for( index = 0; index < QL_GPIO_PIN_MAX; index++ ) { //QL_INIT_LOG("pin%d=%d", index, ql_pin_cfg_map[index].pin_num); if (QUEC_PIN_NONE == ql_pin_cfg_map[index].pin_num) { QL_INIT_LOG("init exit %d!", index); break; } pin_num = ql_pin_cfg_map[index].pin_num; default_func = ql_pin_cfg_map[index].default_func; gpio_func = ql_pin_cfg_map[index].gpio_func; gpio_num = ql_pin_cfg_map[index].gpio_num; gpio_dir = ql_pin_cfg_map[index].gpio_dir; gpio_pull = ql_pin_cfg_map[index].gpio_pull; gpio_lvl = ql_pin_cfg_map[index].gpio_lvl; ql_pin_set_func(pin_num, default_func); if( default_func == gpio_func ) { ql_gpio_init(gpio_num, gpio_dir, gpio_pull, gpio_lvl); } } } void ql_sdmmc_init(void) { //QlOSStatus err = QL_SDMMC_SUCCESS; ql_pin_set_func(QL_PIN_SDMMC_CMD, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_pin_set_func(QL_PIN_SDMMC_DATA_0, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_pin_set_func(QL_PIN_SDMMC_DATA_1, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_pin_set_func(QL_PIN_SDMMC_DATA_2, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_pin_set_func(QL_PIN_SDMMC_DATA_3, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_pin_set_func(QL_PIN_SDMMC_CLK, QL_PIN_SDMMC_MODE_FUNC); // Pin reuse ql_sdmmc_cfg_t cfg = { .dev = QL_SDMMC_SD_CARD_ONLY, // 只以sd卡方式进行初始化 .sd_mv = 0, // SD卡默认电压域3.2v .emmc_mv = 0, // emmc默认电压域1.8v }; ql_sdmmc_set_dev_cfg(cfg); if (QL_SDMMC_SUCCESS != ql_sdmmc_mount()) { QL_INIT_LOG("sd mount failed"); } else { QL_INIT_LOG("sd mount succeed"); // int fd = ql_fopen("SD:123.txt", "wb+"); // if (fd < 0) // { // QL_INIT_LOG("open file failed"); // err = fd; // goto exit; // } // char *str = "sd card test"; // int err = ql_fwrite(str, strlen(str) + 1, 1, fd); // strlen not include '\0' // if (err < 0) // { // QL_INIT_LOG("write file failed"); // } // ql_fclose(fd); } // exit: // return; } ql_task_t ql_rtk_task = NULL; ql_task_t ql_t2n_task = NULL; extern void t2n_task(void *param); extern void rtk_task(void *param); extern void uart1_app_init(void); // extern void test_app_init(void); static void ql_init_demo_thread(void *param) { QL_INIT_LOG("init demo thread enter, param 0x%x", param); /*Caution:If the macro of secure boot and the function are opened, download firmware and restart will enable secure boot. the secret key cannot be changed forever*/ #ifdef QL_APP_FEATURE_SECURE_BOOT //ql_dev_enable_secure_boot(); #endif #if 0 ql_gpio_app_init(); ql_gpioint_app_init(); #endif #ifdef QL_APP_FEATURE_LEDCFG #if !defined(QL_APP_PROJECT_DEF_EC600U) || \ (defined(QL_APP_PROJECT_DEF_EC600U) && !defined(QL_APP_FEATURE_DSSS) && !defined(QL_APP_FEATURE_DSIM)) ql_ledcfg_app_init(); #endif #endif /* 1. 验证usb虚拟U盘功能需要在target.config中打开宏CONFIG_QUEC_PROJECT_FEATURE_USB_MASS_STORAGE 2. 映射sd卡到PC端需要打开sd卡demo(ql_sdmmc_app_init)去挂载sd卡文件系统 3. 映射6线flash到PC端需要打开6线flash demo(ql_spi6_ext_nor_flash_demo_init)挂载6线flash文件系统 */ #ifdef QL_APP_FEATURE_USB //ql_usb_app_init(); #endif #ifdef QL_APP_FEATURE_AUDIO //ql_audio_app_init(); #ifdef QL_APP_FEATURE_HEADSET_DET //ql_headset_det_app_init(); #endif #endif #ifdef QL_APP_FEATURE_TTS /* *demo1直接调用TTS库和audio播放api进行TTS播放， *demo2对TTS库和audio的播放api进行封装，封装后的TTS api与我司asr系列的TTS api类似 *注意：由于audio播放器只有一个，因此这两个demo只能运行一个，不能两个demo同时播放 *用户如需将TTS库放到内核，则在target.config中将 CONFIG_QUEC_PROJECT_FEATURE_TTS_IN_KERNEL 置为 y, 并修改分区，将内核分区增大250k左右，其余的内容不变 */ //ql_tts_demo1_init(); //ql_tts_demo2_init(); #endif #ifdef QL_APP_FEATURE_LCD //ql_lcd_app_init(); #endif #ifdef QL_APP_FEATURE_LVGL //ql_lvgl_app_init(); #endif #ifdef QL_APP_FEATURE_MIPI_LCD /* to show a picture defined at a_rabbit/rabbit_mouse .h file, */ /* it need more flash, please adjust your APPIMG partition size */ //ql_mipi_lcd_app_init(); #endif //ql_nw_app_init(); //ql_datacall_app_init(); //ql_osi_demo_init(); #ifdef QL_APP_FEATURE_SDMMC //ql_sdmmc_app_init(); #endif #ifdef QL_APP_FEATURE_FILE //ql_fs_demo_init(); #endif //ql_dev_app_init(); //ql_adc_app_init(); #ifdef QL_APP_FEATURE_UART //ql_uart_app_init(); //ql_uart_rb_app_init(); #endif #ifdef QL_APP_FEATURE_RS485 //ql_rs485_app_init(); #endif #ifdef QL_APP_FEATURE_BT #ifdef QL_APP_FEATURE_BT_SPP //ql_bt_spp_demo_init(); #endif #ifdef QL_APP_FEATURE_BLE_GATT //ql_ble_gatt_server_demo_init(); //ql_ble_gatt_client_demo_init(); //ql_ble_hid_demo_init(); #endif #ifdef QL_APP_FEATURE_BT_HFP //ql_bt_hfp_demo_init(); #endif #ifdef QL_APP_FEATURE_BT_A2DP_AVRCP //ql_bt_a2dp_avrcp_app_init(); #endif #endif //ql_sim_app_init(); ql_power_app_init(); #ifdef QL_APP_FEATURE_PSM //ql_psm_app_init(); #endif #ifdef QL_APP_FEATURE_CLOUDOTA //ql_cloudota_app_init(); #endif #ifdef QL_APP_FEATURE_PWK //ql_pwrkey_app_init(); #endif #ifdef QL_APP_FEATURE_FTP //ql_ftp_app_init(); #endif #ifdef QL_APP_FEATURE_HTTP //ql_http_app_init(); //ql_http_post_app_init(); //ql_http_put_app_init(); //ql_https_get_app_init(); #endif #ifdef QL_APP_FEATURE_MQTT //ql_mqtt_app_init(); #endif #ifdef QL_APP_FEATURE_SSL //ql_ssl_app_init(); #endif #ifdef QL_APP_FEATURE_PING //ql_ping_app_init(); #endif #ifdef QL_APP_FEATURE_NTP //ql_ntp_app_init(); #endif #ifdef QL_APP_FEATURE_LBS //ql_lbs_app_init(); #if defined (QL_APP_FEATURE_WIFISCAN) //ql_lbs_wifi_app_init(); #endif #endif #ifdef QL_APP_FEATURE_QTHSDK //ql_qthsdk_app_init(); #endif #ifdef QL_APP_FEATURE_SOCKET //ql_socket_app_init(); #endif #ifdef QL_APP_FEATURE_MMS //ql_mms_app_init(); #endif #ifdef QL_APP_FEATURE_SMS //ql_sms_app_init(); #endif #ifdef QL_APP_FEATURE_PBK //ql_pbk_app_init(); #endif #ifdef QL_APP_FEATURE_STK // ql_stk_app_init(); #endif #ifdef QL_APP_FEATURE_VOICE_CALL //ql_voice_call_app_init(); #endif #ifdef QL_APP_FEATURE_VOLTE //ql_volte_app_init(); #endif #ifdef QL_APP_FEATURE_VSIM_ADAPT //ql_vsim_adapt_init(); #endif #ifdef QL_APP_FEATURE_GNSS //ql_gnss_app_init(); #endif #ifdef QL_APP_FEATURE_FILE_ZIP //ql_zip_app_init(); #endif #ifdef QL_APP_FEATURE_SPI //ql_spi_demo_init(); #endif #ifdef QL_APP_FEATURE_CAMERA /*因为camera被i2c用来演示功能，所以打开camera demo时不可同时打开i2c demo*/ /*because camera as a demonstration for i2c, so camera demo can not be opened when the i2c demo open */ //ql_camera_app_init(); #endif #ifdef QL_APP_FEATURE_SPI_NOR_FLASH //ql_spi_nor_flash_demo_init(); #endif #ifdef QL_APP_FEATURE_SPI4_EXT_NOR_SFFS //ql_spi4_ext_nor_sffs_demo_init(); #endif #ifdef QL_APP_FEATURE_SPI6_EXT_NOR //ql_spi6_ext_nor_flash_demo_init(); #endif #ifdef QL_APP_FEATURE_SPI_NAND_FLASH //ql_spi_nand_flash_demo_init(); #endif #if defined (QL_APP_FEATURE_WIFISCAN) //ql_wifiscan_app_init(); #endif #ifdef QL_APP_FEATURE_HTTP_FOTA //ql_fota_http_app_init(); #endif #ifdef QL_APP_FEATURE_FTP_FOTA //ql_fota_ftp_app_init(); #endif #ifdef QL_APP_FEATURE_DECODER //ql_decoder_app_init(); #endif #ifdef QL_APP_FEATURE_APP_IMG_AT //ql_app_img_at_init(); #endif #ifdef QL_APP_FEATURE_KEYPAD //ql_keypad_app_init(); #endif #ifdef QL_APP_FEATURE_RTC //ql_rtc_app_init(); #endif #ifdef QL_APP_FEATURE_USB_CHARGE //ql_charge_app_init(); #endif #ifdef QL_APP_FEATURE_ALI_LINKSDK //ql_ali_sdk_mqtt_client_test_init(); /* mqtt_basic_demo.c */ //ql_ali_sdk_bootstrap_test_init(); /* bootstrap_posix_demo.c */ //ql_ali_sdk_cota_test_init(); /* cota_basic_demo.c */ //ql_ali_sdk_das_test_init(); /* das_basic_demo.c */ //ql_ali_sdk_data_model_test_init(); /* data_model_basic_demo.c */ //ql_ali_sdk_devinfo_test_init(); /* devinfo_posix_demo.c */ //ql_ali_sdk_diag_test_init(); /* diag_basic_demo.c */ //ql_ali_sdk_dynreg_test_init(); /* dynreg_basic_demo.c */ //ql_ali_sdk_dynregmq_test_init(); /* dynregmq_basic_demo.c */ //ql_ali_sdk_fota_test_init(); /* fota_basic_demo.c */ //ql_ali_sdk_http_client_test_init(); /* http_basic_demo.c */ //ql_ali_sdk_logpost_test_init(); /* logpost_basic_demo.c */ //ql_ali_sdk_mqtt_broadcast_test_init(); /* mqtt_broadcast_demo.c */ //ql_ali_sdk_rrpc_test_init(); /* mqtt_rrpc_demo.c */ //ql_ali_sdk_ntp_test_init(); /* ntp_posix_demo.c */ //ql_ali_sdk_shadow_test_init(); /* shadow_basic_demo.c */ #endif #ifdef QL_APP_FEATURE_QCLOUD_IOT //light_data_template_sample_start();/* light_data_template_sample_start_demo.c */ //mqtt_sample_start(); /* mqtt_sample_start_demo.c */ //data_template_sample_start(); /* data_template_sample_start_demo.c */ //ota_mqtt_sample_start(); /* ota_mqtt_sample_start_demo.c */ //raw_data_sample_start(); /* raw_data_sample_start_demo.c */ //dynreg_dev_sample_start(); /* dynreg_dev_sample_start_demo.c */ //gateway_sample_start(); /* gateway_sample_start_demo.c */ #endif #ifdef QL_APP_FEATURE_VIRT_AT //ql_virt_at_app_init(); #endif #ifdef QL_APP_FEATURE_I2C /*因为i2c通过camera来演示功能，所以打开i2c demo时不可同时打开camera demo*/ /*because I2C uses the camera as a demonstration, so i2c demo can not be opened when the camera demo open */ //ql_i2c_demo_init(); #endif #ifdef QL_APP_FEATURE_USBNET //ql_usbnet_app_init(); #endif #ifdef QL_APP_FEATURE_FS_NAND_FLASH //ql_fs_nand_flash_demo_init(); #endif #ifdef QL_APP_FEATURE_FS_NOR_FLASH //ql_fs_nor_flash_demo_init(); #endif #ifdef QL_APP_FEATURE_SFTP //ql_sftp_app_init(); #endif #ifdef QL_APP_FEATURE_MXML //ql_mxml_app_init(); #endif #ifdef QL_APP_FEATURE_EMBED_NOR_FLASH //ql_embed_nor_flash_app_init(); #endif #ifdef QL_APP_FEATURE_HILINK //hilink_main(); #endif #ifdef QL_APP_FEATURE_GPRS_DATA_TRANSFER //ql_gprs_data_transfer_app_init(); #endif #ifdef QL_APP_FEATURE_TP //ql_tp_demo_init(); #endif #ifdef QL_APP_FEATURE_ALIPAY_IOT_SDK //ql_alipay_iot_sdk_app_init(); #endif #ifdef QL_APP_FEATURE_ALIOTSMARTCARD //ql_aliotsmartcard_app_init(); #endif #ifdef QL_APP_FEATURE_NTRIP_RTK //ql_ntrip_rtk_demo_init(); #endif #ifdef QL_APP_FEATURE_LWM2M //ql_m2m_app_init(); #endif #ifdef QL_APP_FEATURE_SS //ql_ussd_app_init(); #endif #ifdef QL_APP_FEATURE_WEBSOCKET //ql_websocket_app_init(); #endif #ifdef QL_APP_FEATURE_ETHERNET //ql_ethernet_demo_init(); #endif #ifdef QL_APP_FEATURE_WIFI //ql_wifi_demo_init(); #endif /***************************************************************************************************/ // // ql_rtos_task_sleep_s(15); // ql_sdmmc_init(); // // test_app_init(); // QlOSStatus err = 0; // err = ql_rtos_task_create(&ql_t2n_task, 8192, APP_PRIORITY_HIGH, "t2n", t2n_task, NULL, 1); // if (err != QL_OSI_SUCCESS){ // QL_INIT_LOG("init failed"); // } // err = ql_rtos_task_create(&ql_rtk_task, 8192, APP_PRIORITY_NORMAL - 1, "rtk", rtk_task, NULL, 1); // if (err != QL_OSI_SUCCESS){ // QL_INIT_LOG("init failed"); // } // uart1_app_init(); // lvgl_demo_init(); // //ql_http_app_init(); ql_esp32_iap_app_init(); /***************************************************************************************************/ ql_rtos_task_sleep_ms(1000); /*Chaos change: set to 1000 for the camera power on*/ /*To save logs to sdcard/nandflash, you must call this function after initializing sdcard/nandflash file system;*/ /*Logs before this point can be output via USB or debug port, which can be configured in prvTraceInit of app_start*/ //ql_fs_trace_init(); ql_rtos_task_delete(NULL); } int appimg_enter(void *param) { QlOSStatus err = QL_OSI_SUCCESS; ql_task_t ql_init_task = NULL; QL_INIT_LOG("init demo enter: %s @ %s", QL_APP_VERSION, QL_APP_BUILD_RELEASE_TYPE); prvInvokeGlobalCtors(); if(0 == strcasecmp(QL_APP_BUILD_RELEASE_TYPE, "release")) { ql_dev_cfg_wdt(1); //open the kernel log //ql_quec_trace_enable(1); } else { ql_dev_cfg_wdt(0); //close the kernel log //ql_quec_trace_enable(0); } /*Caution: GPIO pin must be initialized here, otherwise the pin status cannot be determined*/ ql_pin_cfg_init(); err = ql_rtos_task_create(&ql_init_task, 1024*4, APP_PRIORITY_NORMAL, "ql_init", ql_init_demo_thread, NULL, 1); if(err != QL_OSI_SUCCESS) { QL_INIT_LOG("init failed"); } return err; } void appimg_exit(void) { QL_INIT_LOG("init demo exit"); }