yuanjing/EC600U_esp32_iap_uart
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
eaaf17b1d8
EC600U_esp32_iap_uart/spi/spi_demo.c

479 lines
15 KiB
C
Raw Normal View History

temp
2024-02-05 17:39:56 +08:00
/*================================================================
Copyright (c) 2020 Quectel Wireless Solution, Co., Ltd. All Rights Reserved.
Quectel Wireless Solution Proprietary and Confidential.
=================================================================*/
/*=================================================================
EDIT HISTORY FOR MODULE
This section contains comments describing changes made to the module.
Notice that changes are listed in reverse chronological order.
WHEN WHO WHAT, WHERE, WHY
------------ ------- -------------------------------------------------------------------------------
=================================================================*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "ql_api_osi.h"
#include "ql_api_spi.h"
#include "ql_log.h"
#include "spi_demo.h"
#include "ql_gpio.h"
#include "ql_power.h"
#define QL_SPI_DEMO_LOG_LEVEL QL_LOG_LEVEL_INFO
#define QL_SPI_DEMO_LOG(msg, ...) QL_LOG(QL_SPI_DEMO_LOG_LEVEL, "ql_SPI_DEMO", msg, ##__VA_ARGS__)
#define QL_SPI_DEMO_LOG_PUSH(msg, ...) QL_LOG_PUSH("ql_SPI_DEMO", msg, ##__VA_ARGS__)
/**
* 使用SPI DMA注意事项：
* 1. SPI DMA POLLING和SPI DMA IRQ只支持8bit和16bit的数据传输，不支持32bit数据传输
* 2. 在使用16bit传输数据时，DMA实际使用的是32bit位宽，需要对输出数据插入一些无效数据，对输入数据去除无效数据，
* 因此新增16bit dma api用于16bit情况下的读写，api包含ql_spi_write_16bit_dma、ql_spi_read_16bit_dma、
* ql_spi_write_read_16bit_dma，这部分代码在demo中开源，客户可自行优化，或直接使用
* 3. QL_SPI_16BIT_DMA置为1表示使用16bit DMA demo
*/
#define QL_SPI_16BIT_DMA 0 //16bit DMA demo
#define QL_SPI_DEMO_LOW_POWER_USE 0 //0-not run in lower power mode；1-run in lower power mode
ql_task_t spi_demo_task = NULL;
ql_sem_t spi_demo_write;
ql_sem_t spi_demo_read;
int spi_power_lock = 0;
#define QL_SPI_DEMO_WAIT_NONE 0
#define QL_SPI_DEMO_WAIT_WRITE 1
#define QL_SPI_DEMO_WAIT_READ 2
unsigned char spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_NONE;
#define QL_CUR_SPI_PORT QL_SPI_PORT1
#define QL_CUR_SPI_CS_PIN QL_CUR_SPI1_CS_PIN
#define QL_CUR_SPI_CS_FUNC QL_CUR_SPI1_CS_FUNC
#define QL_CUR_SPI_CLK_PIN QL_CUR_SPI1_CLK_PIN
#define QL_CUR_SPI_CLK_FUNC QL_CUR_SPI1_CLK_FUNC
#define QL_CUR_SPI_DO_PIN QL_CUR_SPI1_DO_PIN
#define QL_CUR_SPI_DO_FUNC QL_CUR_SPI1_DO_FUNC
#define QL_CUR_SPI_DI_PIN QL_CUR_SPI1_DI_PIN
#define QL_CUR_SPI_DI_FUNC QL_CUR_SPI1_DI_FUNC
#define QL_TYPE_SHIFT_8 8
uint32_t g_inbuf[QL_SPI_DMA_IRQ_SIZE/4] OSI_CACHE_LINE_ALIGNED;
uint32_t g_outbuf[QL_SPI_DMA_IRQ_SIZE/4] OSI_CACHE_LINE_ALIGNED;
void ql_spi_read_data_transform(unsigned char *buf, unsigned int len)
{
if(len%2 != 0 || len > QL_SPI_DMA_IRQ_SIZE/2)
{
QL_SPI_DEMO_LOG("invalid parm");
return;
}
for(int i = 0; i < len/2; i++)
{
buf[i*2] = (g_inbuf[i] >> QL_TYPE_SHIFT_8) & 0xFF;
buf[i*2+1] = g_inbuf[i] & 0xFF;
}
}
ql_errcode_spi_e ql_spi_write_16bit_dma(ql_spi_port_e port, unsigned char *buf, unsigned int len)
{
if(len%2 != 0 || len > QL_SPI_DMA_IRQ_SIZE/2)
{
QL_SPI_DEMO_LOG("invalid parm");
return QL_SPI_PARAM_DATA_ERROR;
}
unsigned short out_temp = 0;
for(int i = 0; i < len/2; i++)
{
out_temp = buf[i*2];
g_outbuf[i] = (out_temp << QL_TYPE_SHIFT_8) + buf[i*2+1];
}
return ql_spi_write(port, (unsigned char*)g_outbuf, len*2);
}
ql_errcode_spi_e ql_spi_read_16bit_dma(ql_spi_port_e port, unsigned char *buf, unsigned int len)
{
if(len%2 != 0 || len > QL_SPI_DMA_IRQ_SIZE/2)
{
QL_SPI_DEMO_LOG("invalid parm");
return QL_SPI_PARAM_DATA_ERROR;
}
return ql_spi_read(port, (unsigned char*)g_inbuf, len*2);
}
ql_errcode_spi_e ql_spi_write_read_16bit_dma(ql_spi_port_e port, unsigned char *inbuf, unsigned char *outbuf, unsigned int len)
{
if(len%2 != 0 || len > QL_SPI_DMA_IRQ_SIZE/2)
{
QL_SPI_DEMO_LOG("invalid parm");
return QL_SPI_PARAM_DATA_ERROR;
}
unsigned short out_temp = 0;
for(int i = 0; i < len/2; i++)
{
out_temp = outbuf[i*2];
g_outbuf[i] = (out_temp << QL_TYPE_SHIFT_8) + outbuf[i*2+1];
}
return ql_spi_write_read(port, (unsigned char*)g_inbuf, (unsigned char*)g_outbuf, len*2);
}
void ql_spi_flash_data_printf(unsigned char *data, int len)
{
int i = 0;
int count_len = 256;
int count = 0;
int exit = 0;
unsigned int buf_pos = 0;
unsigned char *str_data = (unsigned char *)malloc(len*2+64);
if (str_data == NULL)
{
QL_SPI_DEMO_LOG("malloc err");
return ;
}
QL_SPI_DEMO_LOG("read len=%d", len);
while ((exit == 0))
{
if (len - count > 256)
{
count_len = 256;
}
else
{
count_len = len - count;
exit = 1;
}
memset(str_data, 0, len*2+64);
buf_pos = 0;
for (i=count; i<count+count_len; i++)
{
//sprintf((char *)str_data,"%s%02x", str_data, data[i]);
buf_pos += sprintf((char *)(str_data + buf_pos),"%02x",data[i]);
}
QL_SPI_DEMO_LOG("data[%d-%d]=%s", count, count+count_len, str_data);
count += count_len;
}
free(str_data);
}
void ql_spi_demo_cb_handler(ql_spi_irq_s cause)
{
if (cause.tx_dma_done == 1 && spi_demo_wait_write_read == QL_SPI_DEMO_WAIT_WRITE)
{
spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_NONE;
ql_rtos_semaphore_release(spi_demo_write);
}
if (cause.rx_dma_done == 1 && spi_demo_wait_write_read == QL_SPI_DEMO_WAIT_READ)
{
spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_NONE;
ql_rtos_semaphore_release(spi_demo_read);
}
QL_SPI_DEMO_LOG("cause.tx_dma_done=%d", cause.tx_dma_done);
QL_SPI_DEMO_LOG("cause.rx_dma_done=%d", cause.rx_dma_done);
}
static void ql_spi_demo_task_pthread(void *ctx)
{
QlOSStatus err = 0;
unsigned char *outdata = NULL;
unsigned short outlen;
unsigned char *indata = NULL;
unsigned short inlen;
unsigned char *out_mal_data = NULL;
unsigned char *in_mal_data = NULL;
ql_errcode_gpio ret;
ql_spi_clk_e spiclk;
ql_spi_transfer_mode_e transmode;
unsigned int framesize;
unsigned int tx_free = 0;
ql_spi_config_s spi_config = {0};
if (QL_CUR_SPI_CS_PIN == QUEC_PIN_NONE || QL_CUR_SPI_CS_PIN == QUEC_PIN_NONE || \
QL_CUR_SPI_DO_PIN == QUEC_PIN_NONE || QL_CUR_SPI_DI_PIN == QUEC_PIN_NONE)
{
QL_SPI_DEMO_LOG("pin err");
goto QL_SPI_EXIT;
}
ret = ql_pin_set_func(QL_CUR_SPI_CS_PIN, QL_CUR_SPI_CS_FUNC);
if (ret != QL_GPIO_SUCCESS)
{
QL_SPI_DEMO_LOG("set pin err");
goto QL_SPI_EXIT;
}
ret = ql_pin_set_func(QL_CUR_SPI_CLK_PIN, QL_CUR_SPI_CLK_FUNC);
if (ret != QL_GPIO_SUCCESS)
{
QL_SPI_DEMO_LOG("set pin err");
goto QL_SPI_EXIT;
}
ret = ql_pin_set_func(QL_CUR_SPI_DO_PIN, QL_CUR_SPI_DO_FUNC);
if (ret != QL_GPIO_SUCCESS)
{
QL_SPI_DEMO_LOG("set pin err");
goto QL_SPI_EXIT;
}
ret = ql_pin_set_func(QL_CUR_SPI_DI_PIN, QL_CUR_SPI_DI_FUNC);
if (ret != QL_GPIO_SUCCESS)
{
QL_SPI_DEMO_LOG("set pin err");
goto QL_SPI_EXIT;
}
//If you use the default parameters, you can initialize it with ql_spi_init
/*transmode = QL_SPI_DMA_IRQ;
spiclk = QL_SPI_CLK_25MHZ;
framesize = 8;
ql_spi_init(QL_CUR_SPI_PORT, transmode, spiclk);
*/
spi_config.input_mode = QL_SPI_INPUT_TRUE;
spi_config.port = QL_CUR_SPI_PORT;
#if QL_SPI_16BIT_DMA
framesize = 16;
#else
framesize = 8;
#endif
transmode = QL_SPI_DMA_IRQ; //使用QL_SPI_DMA_IRQ模式，传输一次最大的数据量为512个字节
spiclk = QL_SPI_CLK_1_5625MHZ;
spi_config.spiclk = spiclk;
spi_config.framesize = framesize;
spi_config.cs_polarity0 = QL_SPI_CS_ACTIVE_LOW;
spi_config.cs_polarity1 = QL_SPI_CS_ACTIVE_LOW;
spi_config.cpol = QL_SPI_CPOL_LOW;
spi_config.cpha = QL_SPI_CPHA_1Edge;
spi_config.input_sel = QL_SPI_DI_1;
spi_config.transmode = transmode;
spi_config.cs = QL_SPI_CS0;
spi_config.clk_delay = QL_SPI_CLK_DELAY_0;
ql_spi_init_ext(spi_config);
//使用QL_SPI_DMA_IRQ模式才会使用到信号量
if(transmode == QL_SPI_DMA_IRQ)
{
ql_spi_irq_s mask = {0};
mask.rx_dma_done = 1;
mask.tx_dma_done = 1;
//mask.tx_threshold = QL_SPI_TRIGGER_4_DATA;
//mask.rx_threshold = QL_SPI_TRIGGER_4_DATA;
ql_rtos_semaphore_create(&spi_demo_write, 0);
ql_rtos_semaphore_create(&spi_demo_read, 0);
ql_spi_set_irq(QL_CUR_SPI_PORT, mask, ql_spi_demo_cb_handler);
}
//用来测试SPI CS脚可以强制拉低，CS脚恢复成系统控制后，不需要强制拉高拉低
ql_spi_cs_low(QL_CUR_SPI_PORT);
ql_rtos_task_sleep_s(3);
ql_spi_cs_auto(QL_CUR_SPI_PORT);
//使用QL_SPI_DMA_IRQ模式，传输一次最大的数据量为512个字节,如果采用16bit传输数据，需要填充256字节无效数据用于DMA对齐，实际有效最大数据量为256字节
#if QL_SPI_16BIT_DMA
outlen = QL_SPI_DMA_IRQ_SIZE/2;
inlen = QL_SPI_DMA_IRQ_SIZE/2;
#else
outlen = QL_SPI_DMA_IRQ_SIZE;
inlen = QL_SPI_DMA_IRQ_SIZE;
#endif
out_mal_data = (unsigned char *)malloc(QL_SPI_DMA_ADDR_ALIN+outlen);
in_mal_data = (unsigned char *)malloc(QL_SPI_DMA_ADDR_ALIN+outlen);
if (out_mal_data == NULL || in_mal_data == NULL)
{
QL_SPI_DEMO_LOG("malloc err");
goto QL_SPI_EXIT;
}
//使用QL_SPI_DMA_POLLING和QL_SPI_DMA_IRQ模式，使用的地址必须4字节对齐
if(transmode == QL_SPI_DMA_POLLING || transmode == QL_SPI_DMA_IRQ)
{
outdata = (unsigned char *)OSI_ALIGN_UP(out_mal_data, QL_SPI_DMA_ADDR_ALIN);
indata = (unsigned char *)OSI_ALIGN_UP(in_mal_data, QL_SPI_DMA_ADDR_ALIN);
}
else
{
outdata = out_mal_data;
indata = in_mal_data;
}
memset(outdata, 0x00, outlen);
memset(indata, 0x00, inlen);
int i = 0, temp = 0;
for (i=0; i<outlen; i++)
{
temp = i % 256;
outdata[i] = temp;
}
ql_spi_flash_data_printf(outdata, outlen);
#if QL_SPI_DEMO_LOW_POWER_USE
ql_autosleep_enable(QL_ALLOW_SLEEP);
ql_rtos_task_sleep_s(2);
#endif
while(1)
{
#if QL_SPI_DEMO_LOW_POWER_USE
ql_lpm_wakelock_lock(spi_power_lock);
#endif
ql_spi_cs_low(QL_CUR_SPI_PORT);
if(transmode == QL_SPI_DMA_IRQ)
{
spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_WRITE;
//不允许进入慢时钟
ql_spi_request_sys_clk(QL_CUR_SPI_PORT);
}
#if QL_SPI_16BIT_DMA
ql_spi_write_16bit_dma(QL_CUR_SPI_PORT, outdata, outlen);
#else
ql_spi_write(QL_CUR_SPI_PORT, outdata, outlen);
#endif
if(transmode == QL_SPI_DMA_IRQ)
{
ql_rtos_semaphore_wait(spi_demo_write, QL_WAIT_FOREVER);
//tx_dma_done只是DMA完成了，但是SPI的FIFO还可能存在数据未发送，在进入慢时钟或clk频率较低时出现
ql_spi_get_tx_fifo_free(QL_CUR_SPI_PORT, &tx_free);
QL_SPI_DEMO_LOG("tx_free=%d",tx_free);
ql_delay_us((framesize+2)*(QL_SPI_FIFO_SIZE - tx_free)*1000000/spiclk);
//恢复允许进入慢时钟
ql_spi_release_sys_clk(QL_CUR_SPI_PORT);
}
if(transmode == QL_SPI_DMA_IRQ)
{
spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_READ;
//不允许进入慢时钟
ql_spi_request_sys_clk(QL_CUR_SPI_PORT);
}
#if QL_SPI_16BIT_DMA
ql_spi_read_16bit_dma(QL_CUR_SPI_PORT, indata, inlen);
#else
ql_spi_read(QL_CUR_SPI_PORT, indata, inlen);
#endif
if(transmode == QL_SPI_DMA_IRQ)
{
ql_rtos_semaphore_wait(spi_demo_read, QL_WAIT_FOREVER);
//恢复允许进入慢时钟
ql_spi_release_sys_clk(QL_CUR_SPI_PORT);
#if QL_SPI_16BIT_DMA
//清除dma输入的无效数据
ql_spi_read_data_transform(indata, inlen);
#endif
}
if(transmode == QL_SPI_DMA_IRQ)
{
spi_demo_wait_write_read = QL_SPI_DEMO_WAIT_READ;
//不允许进入慢时钟
ql_spi_request_sys_clk(QL_CUR_SPI_PORT);
}
#if QL_SPI_16BIT_DMA
ql_spi_write_read_16bit_dma(QL_CUR_SPI_PORT, indata, outdata, inlen);
#else
ql_spi_write_read(QL_CUR_SPI_PORT, indata, outdata, inlen);
#endif
if(transmode == QL_SPI_DMA_IRQ)
{
ql_rtos_semaphore_wait(spi_demo_read, QL_WAIT_FOREVER);
//恢复允许进入慢时钟
ql_spi_release_sys_clk(QL_CUR_SPI_PORT);
#if QL_SPI_16BIT_DMA
//清除dma输入的无效数据
ql_spi_read_data_transform(indata, inlen);
#endif
}
//ql_spi_flash_data_printf(indata, inlen);
#if 0
//测试同步发送接收，需要将模块MOSI和MISO脚短接起来
if (memcmp(indata, outdata, inlen))
{
QL_SPI_DEMO_LOG("write_read not match");
ql_spi_flash_data_printf(indata, inlen);
ql_spi_flash_data_printf(outdata, inlen);
ql_spi_release(QL_CUR_SPI_PORT);
free(out_mal_data);
free(in_mal_data);
goto QL_SPI_EXIT;
}
#endif
ql_spi_cs_high(QL_CUR_SPI_PORT);
#if QL_SPI_DEMO_LOW_POWER_USE
ql_lpm_wakelock_unlock(spi_power_lock);
#endif
//ql_spi_read_follow_write接口不支持QL_SPI_DMA_IRQ模式
if(transmode != QL_SPI_DMA_IRQ)
{
ql_spi_read_follow_write(QL_CUR_SPI_PORT, outdata, outlen, indata, inlen);
ql_rtos_task_sleep_ms(100);
}
ql_rtos_task_sleep_s(2);
}
ql_spi_release(QL_CUR_SPI_PORT);
QL_SPI_EXIT:
if(out_mal_data != NULL)
{
free(out_mal_data);
out_mal_data = NULL;
}
if(in_mal_data != NULL)
{
free(in_mal_data);
in_mal_data = NULL;
}
QL_SPI_DEMO_LOG("ql_rtos_task_delete");
err = ql_rtos_task_delete(NULL);
if(err != QL_OSI_SUCCESS)
{
QL_SPI_DEMO_LOG("task deleted failed");
}
}
QlOSStatus ql_spi_demo_init(void)
{
QlOSStatus err = QL_OSI_SUCCESS;
#if QL_SPI_DEMO_LOW_POWER_USE
spi_power_lock = ql_lpm_wakelock_create("spi_irq", strlen("spi_irq"));
#endif
err = ql_rtos_task_create(&spi_demo_task, SPI_DEMO_TASK_STACK_SIZE, SPI_DEMO_TASK_PRIO, "ql_spi_demo", ql_spi_demo_task_pthread, NULL, SPI_DEMO_TASK_EVENT_CNT);
if(err != QL_OSI_SUCCESS)
{
QL_SPI_DEMO_LOG("demo_task created failed");
return err;
}
return err;
}
Reference in New Issue Copy Permalink